FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
SOLD Parts The parts in here have already been sold. The topics will be kept for a few months for reference. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Complete Butler Rotating Assembly - For Sale
I have a complete Butler rotating assembly for sale. 453 cu. in. as follows:
Eagle cast crank 4.25" stroke w/ 3" main journals and 2.20" rod journals Eagle H-beam rods w/ 2.20" journals and 6.8" length - bushed for floating pins Ross custom flat-top forged pistons w/ .990" floating pins - STD 4.120" bore Sealed Power/Speed Pro 113M main bearings and 7200CH rod bearings - STD Total Seal CR0690 file-to-fit rings All components are new in the original boxes and never installed. This assembly was purchased in 2015 fully balanced by Butler. Pistons are nominal 4.116" for a .004" piston to bore clearance in a 4.120" bore. I purchased this for an NOS 400 block, but have decided to go a different route. I paid $1,898.00 plus shipping and will take $1,500 plus shipping. Assume shipping will be $100+ Located in East Texas - 75757 ZIP code. Tom Kuhn
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
#2
|
|||
|
|||
You've got a pm. Disregard my question re where in East Texas you are located I noticed and googled your zip code and see that you are between Jacksonville and Tyler.
|
#3
|
||||
|
||||
LOL - question about Texas - I see people say West Texas and East Texas - what is the delineating highway the defines east and west?
|
#4
|
|||
|
|||
Well, it’s divided by Central Texas, of course!
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
#5
|
||||
|
||||
In my book it's IH35
__________________
37 Pontiac Sedan 455 700r4 94 Firehawk Supercharged 5.7 LT1 6spd. 77 Grand Prix base model, 350 pontiac 97 F250 7.3 turbo diesel 85 CJ7 Laredo 65 Impala SS 396, 4 spd, A/C. |
#6
|
||||
|
||||
Quote:
John
__________________
Beers Bikes Babes and Pontiacs Rule!!! 63 Lemans in the 9's race 66 GTO HT Cruiser 06 Triumph Rocket III TURBO! 2300 CC Bad boy KTM 525 Dirt Terrorizer POLARIS 900 RZR 10 GMC SLT Duramax Haul anything anywhere http://www.facebook.com/profile.php?...app_2392950137 |
#7
|
|||
|
|||
I-20
|
#8
|
|||
|
|||
I20 doesn’t stretch border to border, but I10 does. It’s about 880 miles east to west from New Mexico to Louisiana.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
#9
|
||||
|
||||
What Compression was this built around with what Cc chamber?
Sent from my iPhone using Tapatalk |
#10
|
|||
|
|||
They were to supposed to give about 10:1 CR using 87cc Edlebrock heads. The pistons are flat-top with two 2.250" valve pockets that are .285" deep, compression height is 1.295", rods are 6.800" long, stroke is 4.250". If you know your deck height you should be able to calculate how far below the deck the piston tops will be. I just told them I had an NOS 400 block.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
#11
|
|||
|
|||
Reasonable offers always considered .......
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
#12
|
||||
|
||||
PM inbound
Sent from my iPhone using Tapatalk |
#13
|
||||
|
||||
Thank you Tom!
Sent from my iPhone using Tapatalk |
|
|