FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Thinking of selling my 70 trans am project and parts stash.
Hey everyone. I am considering selling my nan nuys built 70 TA 4 speed car and a bunch of parts to fund another project. I would rather sell it complete though I may have to separate if I do decide to sell. I was hoping for opinions on a realistic estimated value or aking price for the lot. The car is rusty especially the roof and inside trunk area. All of the sheetmetal is original but the hood is shot and fenders are rough.The frame rails are good. I was originally going to replace the rear section with a back half roller from a 70 firebird, and fix the roof frame and install a skin. The engine Is original, and held antifreeze for the 10 years I have had it, but when I disassembled it, I found it was rebuilt with 030 piston and must have froze some time because there were sections of epoxy in some water jacket areas. Trans and 12 bolt are original. Listed below is a list of original and NOS parts I have with the car. Any help is appreciated on value.
GM NOS left quarter panel GM NOS right quarter panel GM NOS rear tail panel GM NOS fiberglass rear tail panel cover GM NOS front lower valance. (Steel) GM NOS left door skin GM NOS right door skin original air cleaner housing Original shaker scoop missing solenoid Original fan Original ram air manifolds 7040573 california carb Front and rear 70 seats that need to be redone Aftermarket trunk pan Complete extra roof assembly Rear cut off from a 70 firebird 3 - April 10th JW rims 1 -KR rim |
#2
|
|||
|
|||
More pics
More pics of the car
|
#3
|
|||
|
|||
Pics
A few more
|
#4
|
|||
|
|||
Pics
A few more or the rear roller. I also have spare 70 seats, and front fender wells that go with the car along with the original heads, intake manifold and distributor. Floors are also repairable.
Last edited by poncho4554spd; 08-24-2021 at 12:03 PM. |
#5
|
||||
|
||||
Looks like how my 70 started out as.
Idk what this value is, but I know how much I have into mine so far, and it's certainly not cheap bringing a car back from this level of disrepair. When you get a price in mind, I might be interested in it. Lmk!
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
#6
|
|||
|
|||
Will do. I know it might be easier to sell separately and may do so. If there is no interest in the complete package. I might try eBay first and see what happens. I was hoping to try for 13-14k for everything.
|
#7
|
||||
|
||||
Quote:
Do you have PHS? Is it a M20 or M21?
__________________
James 1970 Trans Am Spotts Built 484" IA2, Highports, EFI Northwind Holley Terminator X sequential EFI fabrication and suspension by https://www.funkhouserracecars.com/ |
#8
|
|||
|
|||
Quote:
|
#9
|
||||
|
||||
Big project but a lot of good parts.
|
#10
|
||||
|
||||
Quote:
Where are you located?
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
#11
|
|||
|
|||
Ok. Sounds good. Thanks. I am in NJ.
|
#12
|
||||
|
||||
It's a sin what happened to that block...
__________________
1978 Black & Gold T/A [complete 70 Ram Air III (carb to pan) PQ and 12 bolt], fully loaded, deluxe, WS6, T-Top car - 1972 Formula 455HO Ram Air numbers matching Julep Green - 1971 T/A 455, 320 CFM Eheads, RP cam, Doug's headers, Fuel injection, TKX 5 Spd. 12 Bolt 3.73, 4 wheel disc. All A/C cars |
#13
|
||||
|
||||
I'd be interested in the KR wheel for my '72.
__________________
Current Pontiacs - 1973 Formula SD455 - #'s auto orig paint 1972 Trans Am - 4 speed orig paint 1974 Formula 400 - Ram Air automatic 1966 2+2 convertible - 421 4bbl automatic 1967 Grand Prix - 4 speed orig paint 1967 GTO - 4 speed orig paint 35k orig miles |
#14
|
|||
|
|||
Tell me about it. The car ran when I got it. Sat for a long time holding antifreeze while I had it. It wasn't until I pulled it apart to go through I found it had been cracked in the past and someone used what looked to be some type of epoxy or marine tex to repair.. I will say it didn't leak but I was extremely upset to find what was done.
|
#15
|
|||
|
|||
Don't count it out. My brother had his original 69 T/A WQ block welded up down here in Houston by a company that repairs diesel engines for heavy equipment and tug boats! Had a long crack in the lifter valley from one of those rare hard freezes we get every once in a while.
|
#16
|
||||
|
||||
For someone looking to do a ground up resto, this car and parts is a great starting point. Especially if the block can be repaired.
__________________
keith k 70 Trans Am RA III / T400 / Lucerne Blue / Bright Blue 70 Trans Am RA III / M20 / Lucerne Blue / Sandalwood 70 Formula RA III / M21 / Lucerne Blue / Bright Blue |
The Following User Says Thank You to keith k For This Useful Post: | ||
#17
|
|||
|
|||
1970 formula 400 ra3
i have a 1970 formula 400 ra3 simular to your car. What is asking price of your car? Are you selling it as is? are you considering parting it out? PLease let me know. My name is Ignacio.
|
#18
|
|||
|
|||
Thanks Guys. I am not sure what I am doing yet. I am currently looking at a 72 trans am 4 speed thats in better shape. If I buy it I will sell everything I have to finance restoring that car. I would like to sell it as a package but understand it may be easier to sell the car and parts separate depending on who needs what.
|
#19
|
|||
|
|||
What ended up happening? Did you end up selling it?
|
#20
|
|||
|
|||
parts
Quote:
|
Reply |
|
|