FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
What is the no holds barred best body filler?
Not including lead of course.
Evercoat? Bondo (3M) Etc. Price is not really a factor, I'll probably only need a quart for the whole car... I hope. |
#2
|
|||
|
|||
Evercoat Rage Ultra sands great imho.
Don |
The Following User Says Thank You to dhutton For This Useful Post: | ||
#3
|
||||
|
||||
I researched this extensively before I started my bodywork, and there were so many opinions it was hard to develop a clear answer before choosing one.
I used Rage Gold for most of my car, it was the first "premium" filler I had ever tried compared to the cheap crap I used on previous projects, and it was definitely easier to sand so I liked it. I have since tried 3M Platinum (not Platinum Plus), and it was noticeably easier to sand, less pinholes, and between the two I would use it again as my first choice. I realize there are many options for premium filler and many I have not tried, so others with more experience will have better insight. One thing to be aware of is that many of the higher end fillers are only available in gallon cans...not sure why, but sucks for us hobbiests as I would have bought quarts of several kinds to see what was best.
__________________
Michael 1970 Oshawa built 1 option Judge. 24 year restoration/upgrade project finally finished! 1979 Trans Am - low-buck drag car project for when I retire Last edited by mrennie; 06-26-2021 at 08:45 AM. |
The Following User Says Thank You to mrennie For This Useful Post: | ||
#4
|
||||
|
||||
Quote:
We use 3M Platinum, have been for years. I don't care for the Platinum Plus either. I switched from Rage because it would "chunk up" before the gallon was used up. Whatever you use, keep it sealed when not being used. |
The Following User Says Thank You to 400 4spd. For This Useful Post: | ||
#5
|
||||
|
||||
I've always used Rage Gold, and have had great results. Its easy to work with and sands easy.
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
The Following User Says Thank You to 72projectbird For This Useful Post: | ||
#6
|
||||
|
||||
Excellent, thank you for the recommendations.
Gallon is fine, I use it for various other things around the compound, great as a wood filler, sheet rock repair etc. |
#7
|
||||
|
||||
I now use a German made "cream" that is ultra light and sands like the Platinum. It comes in an accordion squeeze bottle.
This is as close to sprayable as you can get. Ill get the name soon for ya.
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather |
The Following User Says Thank You to Formulabruce For This Useful Post: | ||
#8
|
||||
|
||||
I use Rage but not really tied to one brand. What I do always have on hand is Evercoat Plastik Honey which I can add to filler when I’m skim coating a large panel or when the gallon of filler gets a little thick.
__________________
1968 LeMans conv. 350 HO - 4 speed triple white (hear it idle here) https://www.youtube.com/watch?v=eVmq...ature=youtu.be 1968 LeMans conv. 350 - 4 speed Solar red/pearl |
The Following User Says Thank You to nytrainer For This Useful Post: | ||
#9
|
|||
|
|||
I have always used duraglass as base coat of filler hard to sand but worth it.
|
The Following User Says Thank You to grandam1979 For This Useful Post: | ||
#10
|
|||
|
|||
Snowball….and Nitro Stan…..Iam old school………
|
The Following User Says Thank You to MUSLCAH For This Useful Post: | ||
#11
|
|||
|
|||
I don’t like to give out my secrets…it just keeps me a step ahead of the competition….you know,like a good meatball recipe !
|
#12
|
||||
|
||||
No idea what snowball is, but in 1970 Dad used Nitro-Stan on a '29 A Roadster. One trick was thinning it and putting it in the spray gun to create a high-build leveler over his lead work.
|
#13
|
||||
|
||||
I still have some Nitro-Stan.. Nitro Cellulose wrinkle maker.
I doubt there is much that can shrivel up like this stuff. Its not for anything except scratches on old lacquer. This is one reason why I like "improvement!
__________________
"The Future Belongs to those who are STILL Willing to get their Hands Dirty" .. my Grandfather |
#14
|
|||
|
|||
AKA….”Red Lead “
|
#15
|
|||
|
|||
I like 3M Platinum in gallon can. Goes on smooth, sands easily, some pinholes but I think all fillers will do that at times. Be aware, just cause it comes in a gallon can doesn’t mean u get a full gallon. More like 80% of a gallon. Don’t know why 3M does that??
I guess it like potato chip bags get smaller and smaller but price remains the same! and ice cream too. Have a good Sunday all |
#16
|
||||
|
||||
Use Fusion by US Chemical. Sands very easy , no pinholes and has additives to prevent rust.
|
#17
|
|||
|
|||
Don’t say I Nevah gave you anything. It’s sands like Sheetrock spackle…The first cut is done with 80 grit…..so don’t buy anymore 40 grit paper. You’ll thank me later. Iam sure Don hates it…..lol
|
#18
|
||||
|
||||
I use that when I can get it, it's great stuff.
__________________
1969 GTO street strip project 11.1 forged 461, highport heads 1995 Trans-am 420 ci sb 14:1 compression 9"ford 9.89@132 1.34 60ft SOLD! |
#19
|
||||
|
||||
Is the Evercoat "Edge" even made anymore? It's not listed on the Evercoat website, or is it just Evercoat "Premium" with the "Edge" added because that's the Evercoat trademark?
I bought a gallon of 3M Platinum to give that a try. Any modern filler is going to better that what I was used to 40 years ago, needed a cheese grater to sand it, always seemed a bit tacky or gummy unless it dried for days. |
#20
|
|||
|
|||
Quote:
I love that stuff…. Don |
The Following User Says Thank You to dhutton For This Useful Post: | ||
Reply |
|
|