FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Turn Signal Indicator
Here is a new one on me. My switch is new, all the outside lights work like they should but the dash turn signal light/indicator only lights up (and blinks) for a right turn.
The left side works but no indication. The only thing I can assume is the switch is bad for the left. Anyone else have this type of situation? |
#2
|
||||
|
||||
Solved! After I wrote this post I was thinking about it, I had installed some small LED lights for the instrument lighting. I "thought" I put a regular bulb in that location as a LED (diode) will only work one way. I didn't, it had a LED in that socket. What a PAIN in the : it is to remove and replace that one little bulb. It might be the hardest one to get to...
|
#3
|
|||
|
|||
Good catch! With a shared single bulb for left and right, the current has to be able to flow in both directions, which you obviously know.
__________________
Hoping to finish a project while I'm still able to push the clutch in.... 1963 Tempest Convertible (195-1bbl, 3-speed transaxle. 428 RAIV, 5-speed, IRS planned) Pictures |
Reply |
|
|