FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
MSD Trigger wheel pilot hole diameter?
Anyone know the diameter of the pilot hole in the middle of the #8650 7" trigger wheel? Curious if it will over my old Fluidamper register that sits @ 2.46". Looks like it should. I know it uses bolts to secure, just curious if it will need to be machined to rest flat.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
#2
|
||||
|
||||
Called MSD/Holley Support - it wont fit. I'm far from surprised. Diameter is 1.82" according to Tech Support. Id have to machine off an awful lot for it to fit and center on the register.
__________________
. Mark S . Who needs nice and pretty, when you can have mean and nasty? KRE Aluminum headed 463CID 73 LeMans. Used to run 10.6x @ 124.55. 3700lbs . So much for 2020...shootin for 9s in 2021...and in 2022 apparently.....looks like 2023 as well. >>My 73 Build thread |
Reply |
|
|