FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Speedmaster Heads
I know Chinese Knock-off stuff can be a controversial topic around here but for this price I'm gonna take my chances and try a set out.
__________________
|
#2
|
|||
|
|||
I think you’ll love them especially at $1100! I bought a pair of bbc rectangular port Pro Comps bare, which I believe are the same, ported them, put good valves etc in them flowed them and dynoed the engine on Bischoff’s equipment and got 390cfm, and 730hp on pump gas. It was a 489, car weighed 3350 and it went low tens @ 129. Never had a head failure as long as I had it at least which was 2 years. Hope this helps you.
|
#3
|
||||
|
||||
Quote:
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
#4
|
||||
|
||||
Quote:
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
#5
|
||||
|
||||
There have been reports of seats falling out of the BBC heads and poor machining work, how this may reflect at this point on there Pontiac heads remains to be seen when and if enough numbers of them get out there!
One things for sure that being on street motors of under 455 cid and running Cam's of less then 250 Intake duration@ .050" your better off running the Edelbrock or KRE D port heads with there smaller port area/ volume!
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#6
|
|||
|
|||
Smoking deal even if you have to put a few bucks into them to have them checked out & tweaked.
|
#7
|
|||
|
|||
Is this the same heads that Randy is selling?
Clay |
#8
|
||||
|
||||
Definitely worth checking out
Add in having your friendly local Machine Shops cost to fully check them out before install. I had bought a set of Pro-Comps 59cc SBC heads with a 210cc runner volume that flowed 250+ out of box and they worked fine for $785. I did have a shop fully check them out and they confirmed.
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#9
|
||||
|
||||
__________________
Carburetor building & modification services Servicing the Pontiac community over 20 years |
#10
|
||||
|
||||
https://www.summitracing.com/search/...%3Aspeedmaster
https://speedmaster79.com/engines-co...cylinder-heads |
#11
|
|||
|
|||
Quote:
Hey Steve, do you have some inside info on these? Their specs list a 215 intake as does Edelbrock’s. Could you please expound on your comments? Happy Thanksgiving! Murf Sent from my iPhone using Tapatalk Pro |
#12
|
||||
|
||||
Goatzilla on here is the distributor for them.
He put them on a dragster but I don't believe he got back out before the cold winter set in. |
#13
|
||||
|
||||
https://speedmaster79.com/Pontiac-38...er-Head?page=1 Without intake for the pair.
|
#14
|
|||
|
|||
In the description of the head it says “sold in pairs”
|
#15
|
|||
|
|||
Quote:
|
#16
|
|||
|
|||
Quote:
The intake also has a promo deal. Get the heads and intake seperate and you can knock nearly 60 bucks off the 1300 deal. $1,240.74 bought seperately and you still get free shipping. At least that's how it looks to me Clay https://speedmaster79.com/Pontiac-38...ds-FREE-Intake https://speedmaster79.com/Pontiac-38...-Cylinder-Head https://speedmaster79.com/Pontiac-32...nifold-Satin_2 |
#17
|
||||
|
||||
Man, that's extremely tempting.
__________________
"Those poor souls have made the fatal mistake of surrounding us. Now we can fire in any direction" 1970 Trans Am RAIII 4 speed 1971 Trans Am 5.3 LM7 1977 Trans Am W72 Y82 1987 Grand National |
#18
|
|||
|
|||
Anybody know anything about the intakes? They show two single planes but the description of either one says it fits under a T/A scoop. One is $126 the other is $187.
|
#19
|
||||
|
||||
It's a great deal and a great example of the free enterprise system. I just bought $12000 worth of their heads to get close to that price with free shipping.
Now when I should be running a BLACK FRIDAY Sale of my own, my customers can buy direct from them at less than dealer cost and get free shipping - go figure! I WILL MATCH THEIR DEAL TO GAIN YOU AS A CUSTOMER! I don't have the free intake deal but I have another pallet of complete heads heading my way from Speedmaster. 7 sets of which are available. Complete, delivered to your door in the US 48 for way less than dealer cost at $1114.74. I can't do credit cards or PayPal at this price, CHECKS or MONEY ORDERS ONLY. Orders must be received or an email sent with a copy of your check or money order by midnight Monday Dec 2nd. ONLY 7 SETS AT THIS PRICE because I can't replace these at that price. It's GO TIME! High Performance Injuns 1632 E Northfield Dr #500 Brownsburg IN 46112
__________________
Randy Repp 1964 GTO "GoatZilla" 1964 GTO "Injunuity" A/FX Nostalgia Super Stock 220" Rear Engine Pontiac Powered Dragster https://www.facebook.com/PontiacSpeedShop/ https://www.facebook.com/GoatZillaRacing/ https://www.facebook.com/groups/RebuildExcitement/ https://www.facebook.com/Call1844RacersRV/ https://www.facebook.com/groups/INJUNWARS/ Last edited by GoatZillaRacing; 11-28-2019 at 01:35 PM. |
#20
|
||||
|
||||
Quote:
__________________
Will Rivera '69 Firebird 400/461, 290+ E D-Ports, HR 230/236, 4l80E, 8.5 Rear, 3.55 gears ‘66 Lemans, 455, KRE D-Ports, TH350, 12 bolt 3.90 gears '64 LeMans 400/461, #16 Heads, HR 230/236, TKO600, 9inch Rear, 3.89 gears (Traded) '69 LeMans Vert, 350, #47 heads: Non-running project |
Reply |
|
|