FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#401
|
||||
|
||||
Cam Plate worn 12 passes
Scott is making up a new torrington bearing set up for my 505. We did 5 dyno pulls and 12 actual passes on the motor. Upon tear down the cam had 12 thou movement for and aft. It was a Brand NEW tool steel cam plate with 50mm Roller cam bearings. The result was a heavily grooved cam plate. Scott is making up a set up that will be compatible with the roller bearing set up. Make sure you upgrade when using roller cam bearings. You need to get oil feed to the cam plate.
|
#402
|
|||
|
|||
Hi All .... 2015 was crazy to say the least. Quitting my job with Cummins Inc. and pursuing my dreams has proven to be the right move. I do miss the people there at the big C but when faced with the decision of staying there or going off on my own...well...the only thing I might regret in life would have been NOT following my dreams. I haven't looked back and with no regrets.
I know that I said I would try to make some oil pump drive shafts last year but the jobs and time on the cnc okuma lathe was filled up. I haven't forgot, I have the material right here next to my desk so I wont forget. I will get to them! Promise! The Roller cam plate business seems steady .. picking up a little for the winter builds going on. I do still make these. Making up one special for the 50mm cam that blocks off the oil on the face of the block to feed it through the roller bearings first, then to the timing chain.If you need one of these or a standard one, let me know. thanks for all the support and patience... Scott Sims Performance Machining, LLC PO Box 184 Elizabethtown, Indiana 47232 812-350-8637
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#403
|
||||
|
||||
Sent you an email about a gear and plate set. Im in for another.
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
#404
|
||||
|
||||
Here is a great write up on this part.
http://www.hotrod.com/how-to/engine/...haft-retainer/
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
#405
|
|||
|
|||
Hi All...I have 3 standard length timing sets and 1 - .005 under set ready to ship. Let me know....thanks...Scott
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#406
|
|||
|
|||
Scott,
I PM'd you about a set. Let me know, John
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
#407
|
|||
|
|||
I could use a set too please..
|
#408
|
|||
|
|||
Guys...you are MUCH better calling him at the # right in his signature. He rarely gets on the forum and easily misses a notification from PY...but will always answer or get back with a phone call.
|
#409
|
|||
|
|||
^^^ Cool, thanks!
__________________
John IG: @crawdaddycustoms YouTube: https://www.youtube.com/channel/UCK9...Nc_lk1Q/videos |
#410
|
|||
|
|||
How much do these run now?
|
#411
|
|||
|
|||
If I recall its around $275. Best to call him and ask directly though.
|
#412
|
|||
|
|||
bump
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#413
|
||||
|
||||
I just installed mine last weekend. Very nice piece!
Sent from my XT1585 using Tapatalk
__________________
68 Firebird-- Street/Strip - 400/461 Eagle Forged Bottom End & Ross Flat top pistons. KRE 325 CFM D port, Ultradyne 263/271 @.050, .4267 lift. Crower Solid roller lifters and 1.65 stainless rockers. Quickfuel 1000 on Torker2 intake and 2" open spacer. Hedman 1.75" headers. TH400 w/brake. Ford 9" w/3.80 gears & 28x9 Hoosier pro bracket drag radial. Best ET: 1.35 60ft, 6.29 @ 107.20 mph, 9.99 @132.33 mph. 3,300 race weight |
#414
|
||||
|
||||
Me too. This will be my third from Scott. Excellent component.
__________________
1964 GTO 501, Edelbrock Heads NA, 3460 lbs. 9.76 @ 137mph 1971 Trans Am Lucy Blue, 11.56 @ 115 1966 LeMans. 462, SD prepped Kaufman D ports. 11.90 @ 112 1976 Trans Am twin turbo 462, SD Edelbrock heads 8.50@159 2009 G8 GT |
#415
|
|||
|
|||
I have 2 STD. Sets and a 5 under if anyone needs one....email me....simsb53@gmail.com
$285 to your door Thanks for all the business, Scott
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#416
|
||||
|
||||
What's the cost to have my cam gear milled and existing bearing setup checked for proper end play?
__________________
This world is your world, so take it, but take it easy. |
#417
|
|||
|
|||
Can you be more specific?
Thanks...Scott
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#418
|
||||
|
||||
I sent you a PM, thanks
__________________
This world is your world, so take it, but take it easy. |
#419
|
|||
|
|||
pm back at you...sorry for not getting back to you....
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
#420
|
|||
|
|||
Hi there everybody....I have a new .005 under rollmaster timing set with the roller set up installed....$285 to your door in the lower 48
__________________
Scott Sims Sims Performance Machining LLC P.O. Box 184 Elizabethtown, Indiana 47232 phone... 812-350-8637 simsb53@gmail.com |
Reply |
|
|