FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Ames Customer Satisfaction Forum Post a 'current' compliment, suggestion or issue with regard to an Ames service or product. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
oil pressure sending unit, right one sent?
So I ordered an oil pressure sending unit for my 1970 Pontiac GTO. 455 motor and i'm pretty sure its a 74 model if I recall correctly. I ordered part number M196D "Oil pressure sending unit W/gauges" and is labeled as such on the bag. My concern is, the sending unit itself is stamped with a "60" on it. Now I know you offer this unit in both 60# and 80# so I am worried that the "60" stamped on it is for a 60# sending unit? My Rally Gauges go up to 80# reading so I want to make sure I have a 80# compatible sending unit.
Thank you. |
#2
|
||||
|
||||
360Rocket, please email me at kyler@amesperf.com with your customer info, and we will resolve the issue asap. It does look like the incorrect one was sent. I apologize for any inconvenience!
__________________
[/SIGPIC] |
#3
|
||||
|
||||
No worries, Information sent sir, thank you.
|
#4
|
||||
|
||||
Kyler handled this issue quickly and like a champ. Thank you sir.
|
#5
|
||||
|
||||
Turned out to not be the sending unit after all, looks to be a bad wire. Fixed it and the Rally Gauge now reads 15-20 PSI higher than my mechanical gauge, lol, at least I get a reading instead of a dead needle. Thanks again.
|
Reply |
|
|