FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
63 Corvette tilt collumn
I bought a ididit Vette collumn with tilt for my 63 LeMans. They both are 1.5 inch on the lower part.
Also a 13.5 inch grant steering wheel, and a borgeson steering shaft coupler for 3/4 36 splines to 3/4 double D and ground the shaft to fit the double d coupler. It fits nicely. ...ididit wanted $485 but classicrods.com has em for $385 with free shipping. |
#2
|
||||
|
||||
Nice, Looks good, great cross fit.
|
#3
|
||||
|
||||
Nice! Wondering how the directional signal wiring hooks up and also if the new column has the emergency flasher setup? John
|
#4
|
|||
|
|||
https://www.ididitinc.com/c-1310143-...oor-shift.html
Link to the collumn specs. It does have an emergency flasher switch and the harness plug is 3 7/8 flat which is what aftermarket wire harnesses use. |
#5
|
|||
|
|||
Very cool. I might have to copy you and do this too. Was there any modifications you needed to make to get it to work, or was it all plug and play?
|
#6
|
|||
|
|||
Have not wired anything yet, but it does not plug in.
|
#7
|
|||
|
|||
Here are the two different plugs.
|
#8
|
||||
|
||||
I wondered if the column came with a directional wiring schematic? If so could you please post it?
|
#9
|
|||
|
|||
Wiring instructions.
|
#10
|
|||
|
|||
Harness plug.
|
#11
|
||||
|
||||
Thanks for the Help!
|
Reply |
|
|