[hdpontiac]

1 have a 1965 Pontiac gto with power drum brakes with factory rally 1 rims does anyone know of a disc brake kit that will retain the rally 1 rims they are 14 inch and will bolt in with no hassle I tried a few companies put the tech wasn't promising if there product would fit with no issues

[SONIC 4 U]

Just order a kit from inline tube for a 67 GTO. Looks much cleaner than the “conversions kit”


Sent from my iPhone using Tapatalk

[gtospieg]

It sounds like your question is "Will the Rally I's clear the disc brake set up?" If you have a friend with a 69-72 A body with discs you can try and fit your wheel on that set-up and see if it clears. If it does then you know what set-up to get for your car. I know some of the aftermarket kits say to use 15" wheels. Good luck with your swap.

[LATECH]

I forget which GM car had the 11 inch rotors, but this kit from opgi may give you some direction

https://www.opgi.com/gto/1970/brake-...rakes/CH28690/

I saw an article about this same topic and it said to use the ???? 11 inch rotors and calipers .I just dont remember which donor car it was

[64speed]

Get the CPP kit that uses regular 68-72 pieces. It will work fine. Uses 11 inch rotors and D52 calipers.

[Murf]

https://scarebird.com/index.php?rout...&product_id=67

I think this is what your looking for. He is a member on this forum.

Good luck
Murf

Sent from my Z936L using Tapatalk