| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-03-2018, 07:07 PM
|
||||
|
||||
64 Rear Axle Bearing Retainer Collar
I did a search on this item and did not find an answer to my issue. On my 64 Lemans, I pressed on new RW 507 rear axle bearings.. I did not press on the retaining collar because the new collar is 5/8" wide and the original collar is 3/8" wide. Before installing the new collar I want to learn if there will be a clearance issue between the wider retaining collar and the axle seal inside the axle tube. Looks like there is plenty of clearance, but I want to know for sure from those that have been there and done that. As always, I appreciate the help.
|
|
#2
02-03-2018, 08:17 PM
|
||||
|
||||
|
The wider collar is what I've seen most of the time, you'll be fine.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
|
#3
02-03-2018, 08:28 PM
|
||||
|
||||
|
Thank you, b-man. I'm proceeding forward!
|
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
