[jcruz]

Selling a set of KRE High Port heads. $2100.

I purchased these about 8 years ago and they were installed on my 1974 455 in my 69 Firebird. I took them off about a year ago. In the end, I'm not much into drag racing and I'm changing the car so it's more street friendly.

These heads are 56cc and flow approximately 330 cfm. I purchased them as "complete heads" from KRE. No port work was ever done. I've been asked how many miles are on the heads -- I'm not really sure, but I only went drag racing a few times and only occasionally drove the car around town. I'm guessing less than 1000 miles.



















Also for sale is the mated Torker II intake for $200.







SHIPPING INFORMATION:

Shipping is from Fort Myers FL, 33908. I built some crates for the heads.



Dimensions for the head boxes are 24 x 13 x 10 and each package will weigh approximately 60 pounds. As an example, shipping both heads out to San Jose CA via UPS would be approximately $252. Obviously, your location will vary the cost.

Dimensions for the intake are 24 x 14 x 8 and shipping on this using the same example would be approximately $46.

So, if you're interested in purchasing the heads and the intake together, total costs would be approximately:

heads: $2100
Intake: $200
Shipping: $300
Total: $2600

Price is firm. Paypal is the preferred payment method.

PM me if you're interested or you can contact me directly at 239.565.1951

Thanks,

John

[ponjohn]

What are the springs set up for?

[jcruz]

Originally Posted by ponjohn

What are the springs set up for?

Not sure what you mean? I had Scorpion rockers on them.

[Chief of the 60's]

He is referring to cam/spring height & pressure. Although the springs are 8 years old

[jcruz]

Originally Posted by Chief of the 60's

He is referring to cam/spring height & pressure. Although the springs are 8 years old

Ah, thanks for the clarification...unknown. A local shop built the engine -- I just provided all the money.

It was set up for a Crower roller cam but unfortunately I don't have any cam specs.

[jcruz]

TTT

Price lowered on the heads to $1,900 (mated intake still $200) + shipping.

Also open to offers.

My 455 was running 600hp with these heads on pump gas.

Thanks,

John

[jcruz]

TTT and price lowered to $1,800 for the heads.

I'll also throw in the head studs and push rods.

A few people have asked how I was able to ran pump gas -- pistons were dished. Unfortunately, I don't any specs on how much.

[BLANK1]

PM Sent

[jcruz]

Sold. Thank you PY!