FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
First Gen motor mounts
Just curious what motor mounts people are using in their first gens? I've got stock replacement rubber ones that are about a year old. The new engine move so an awful lot more than the old one did. And I'm not feeling all that corfortable with it.
|
#2
|
||||
|
||||
|
#3
|
||||
|
||||
|
#4
|
|||
|
|||
Some aftermarket mounts also don't have a deep enough hole for the center bolt to seat properly. Rupita-rupita-rupita
|
#5
|
||||
|
||||
http://butlerperformance.com/c-13935...rebird-ta.html
Anyone ever use these? Sent from my iPhone using Tapatalk |
#6
|
|||
|
|||
I used the Poly mounts from butler. Fit nice, but I've only had my bird together a few weeks, not many miles on the mounts.
|
#7
|
||||
|
||||
I use the Butler poly/SS mounts in my racecar and the only complaint is that one of my 2" header tubes melted one of the corners, but didn't interfere with the function. They work good.
__________________
1967 Firechicken, 499", Edl heads, 262/266@0.050" duration and 0.627"/0.643 lift SR cam, 3.90 gear, 28" tire, 3550#. 10.01@134.3 mph with a 1.45 60'. Still WAY under the rollbar rule. |
#8
|
||||
|
||||
We used the Butler poly mounts. Had to trim a little sliver off the one corner of the mount on the passenger side. It was rubbing on the long branch.
Sent from my iPhone using Tapatalk |
Reply |
|
|