[67'7F6'Bird]

When considering a Remote Oil Filter Relocation Kit what if anything is there to consider? Are there any drawbacks to having one installed? Is Oil Pressure effected?

[Tom Vaught]

1) Use BIG lines and large port filter housings and you will be fine.

2) Try to keep the filter housing near the back of the engine (close to firewall) unless you use large lines then mounting on front of passenger head is ok too.

3) Some plumb from the Front of head mounted filter housing with a extra oil circuit to the front of the driver's side oil gallery. Mike and Eric for one.

Tom V.

[GTOGEORGE]

Originally Posted by 67'7F6'Bird

When considering a Remote Oil Filter Relocation Kit what if anything is there to consider? Are there any drawbacks to having one installed? Is Oil Pressure effected?

Oil pressure is not effected, I used no.10 lines to my remote.


GTO George

[BADDTA]

We installed the moroso remote this winter. -10 lines. 2 quart filter. Works great. No pressure loss and much easier to work on.

Brian

[janderson]

Mounted on firewall, Nunzi adapter on block, -10 lines to system 1 filter and housing.

[Curious George]

I used -10 lines as well, filter mounted behind passenger front tire. Seems to be working well thus far.

[67 455 Bird ragtop]

Originally Posted by BADDTA

We installed the moroso remote this winter. -10 lines. 2 quart filter. Works great. No pressure loss and much easier to work on.

Brian

Like the mount. Would the upper port be good for a low pressure cutoff switch as well as a pressure sensor/gauge ??

[BADDTA]

Originally Posted by 67 455 Bird ragtop

Like the mount. Would the upper port be good for a low pressure cutoff switch as well as a pressure sensor/gauge ??

It is after the oil is filtered. Should work for you.

Brian

[67 455 Bird ragtop]

Originally Posted by BADDTA

It is after the oil is filtered. Should work for you.

Brian

Thanks !!