[6d7gto]

Anyone have a pair of really nice original shafts they want to part with? It's okay if they are still attached to the control arms. I will remove them myself after buying the whole unit. If selling that way, hopefully the control arms are severely pitted or damaged. Hate to cut up good control arms just for the shafts. I'm in SoCal and prefer local parts to eliminate shipping. Thanks.

Robert

6d7gto@gmail.com

[trynsave]

why do u haf to cut up the control arms to get the shafts?

[ROCKETMAN269V]

I have a pair already removed. Email me direct for pics, etc.: drolds1@bellsouth.net. Thanks, Bob.

[6d7gto]

Originally Posted by trynsave

why do u haf to cut up the control arms to get the shafts?

Don't know how to remove them any other way. Is there a technique for removing the bushings while shafts are in place?

[Old Goat 67]

Gas hatchet or air impact.

[trynsave]

air chisel

[Old Goat 67]

Originally Posted by trynsave

air chisel

That's what I meant to say!

[6d7gto]

Thanks for the input. I'd be afraid my air chisel (and my ability to use it) might damage both the cross shaft and the control arm. Most control arms I've seen this old are severely pitted anyway and not worth saving for what I have in mind. While more often than not, the shafts are still in great condition. Looking for original shafts to install into my restored concours arms. More than willing to pay the much higher shipping costs for complete units but not willing to cut up good parts to get the shaft (pun intended). Ideally, the shafts would already be removed without damaging them like Rocketman has.

[ROCKETMAN269V]

The ones that I have are aftermarket, "problem solver" offset shafts, that were designed to compensate for improper camber, due to a sagging crossmember. I apologize for any inconvenience.

[6d7gto]

Originally Posted by ROCKETMAN269V

The ones that I have are aftermarket, "problem solver" offset shafts, that were designed to compensate for improper camber, due to a sagging crossmember. I apologize for any inconvenience.

No apology necessary. Thanks for responding.

Robert
6d7gto@gmail.com

[markvecc]

PM sent

[6d7gto]

At least one more '67 A body original cross shaft needed.

[trynsave]

ive got a few

[6d7gto]

Originally Posted by trynsave

ive got a few

Can you please email me with photos and price? Thanks.

6d7gto@gmail.com

[6d7gto]

Originally Posted by trynsave

ive got a few

Never heard back from you. Did you ever find them? I will buy all the good ones you can muster up. Thanks.

Robert
6d7gto@gmail.com

[6d7gto]

Need good condition ORIGINAL upper control arm cross shafts, both styles. Early ones have the bolts on the ends while the later ones utilized locknuts. Thanks to Markvecc I have a good one of the later style now. Thanks Mark!