FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
crane cam regrinds
has anybody had a cam reground from crane cams?
I talked to them yesterday and they can do them I just wondered if anybody has had one done
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#2
|
|||
|
|||
Had one done about 1984! My experience is not too timely, I am afraid!
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
#3
|
||||
|
||||
do you remember what the grind was and were you happy with it?
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#4
|
|||
|
|||
Have not used Crane but have used Isky,very reasonable.Tom
|
#5
|
|||
|
|||
I bought a used motor on craigslist with a cam reground by crane that i threw into my current motor. Its an H-320 regrind. I have also have another camcard listed as H-250 from crane.
__________________
1969 Firebird OHC 6 Sprint Clifford Intake, Clifford Shorty Headers, Crane H320 Custom Grind Cam, Edelbrock 550CFM, T5 5 Speed Transmission (.63 OD), 8.5 10 Bolt Posi 4.11 Gears. |
#6
|
|||
|
|||
My Crane was an H290. My knowledge of carb tuning for engine mods is minimal and the head was largely stock. I think with some good port work, she would really pull.
__________________
"At no time did we exceed 175 mph.” Dan Gurney's truthful response to his and Brock Yate's winning of the first ever Cannonball Baker Sea-to-Shining Sea... Still have my 1st Firebird 7th Firebird 57 Starchief |
#7
|
||||
|
||||
anybody have the specs from the cam cards
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#8
|
||||
|
||||
I just watched an episode of Wheeler Dealers where they had a 240 Z Cam reground. Seemed like a crude process including straightening it somewhat by hand... with hammers...But the results were good. Always heard about this and wondered.
__________________
-- James Work '67 GTO Convertible "Koerner Built 413 500 hp with a Victor!.. I'll run a stock intake." '75 Formula 400 - Daily Driver - Running with my Home Built 455 and TH400 Details here: http://forums.maxperformanceinc.com/...d.php?t=588372 |
#9
|
||||
|
||||
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#10
|
||||
|
||||
how did you like that h-320 good power? how does it idle? what did you do to compensate for reduced base circle?
__________________
When you really do something right it's like you didn't do anything at all 1931 Pontiac 5 window coupe OHC6 powered 2015 GMC Yukon SLT |
#11
|
|||
|
|||
Cam has great drive ability. Has a very choppy idle.
__________________
1969 Firebird OHC 6 Sprint Clifford Intake, Clifford Shorty Headers, Crane H320 Custom Grind Cam, Edelbrock 550CFM, T5 5 Speed Transmission (.63 OD), 8.5 10 Bolt Posi 4.11 Gears. |
Reply |
|
|