FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Trans mount
My 67 GTO has been chewing up my fan shroud at the bottom, I think I moved the position of the fan when I updated the timing cover to a 11 bolt and W/P. My trans mount is 1 13/16 tall. Is there a trans mount slightly shorter that would change the geometry and position it correctly. Any ideas are welcome.
|
#2
|
|||
|
|||
How are your motor mounts? Are they compressed?
|
#3
|
|||
|
|||
I'm thinking motor mount issues.
__________________
My money talks to me-it usually says goodbye! |
#4
|
|||
|
|||
All new
|
#5
|
|||
|
|||
Check your frame where the trans X member bolts up.People jack up the car there and bend it which make the back of the trans higher and the fan lower.I have run into it on my GTO.Also I think aftermarket trans mounts are thicker.I had a shop take 1/4 in off mine.The fan should be in the same position with either the 8 bolt or 11 bolt timing cover.Tom
|
#6
|
|||
|
|||
Look and see if your center link is really close to the oil pan, you may need motor mount shims or spacers.
|
#7
|
||||
|
||||
Mike, I noticed the same issue that TomS mentioned above in my 69 GTO. Both previous owners and I jacked the car up from the wrong place. I tried to straiten it as much as I could.
__________________
Brentwood, TN 69 & 70 GTO's |
#8
|
|||
|
|||
I took mine to a body shop and put it on his frame machine.Tom
|
Reply |
|
|