FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Removing over spray from exhaust?
How do I get over spray off my exhaust pipes? I also have some on my painted frame rail.
Suggestions?
__________________
Adam __________________ 1964 LeGTO 469, M21, 3.42 __________________ Sold: 1968 Pontiac LeMans Convertible See it go HERE |
#2
|
||||
|
||||
Lacquer thinner, steel wool or scotch brite in that order.
If you're not fussy about it, silver paint over the blue! |
#3
|
||||
|
||||
Sounds easy enough. What about the over spray on my painted frame?
__________________
Adam __________________ 1964 LeGTO 469, M21, 3.42 __________________ Sold: 1968 Pontiac LeMans Convertible See it go HERE Last edited by AdamIsAdam; 07-01-2016 at 04:56 PM. |
#4
|
|||
|
|||
little thinner on a rag for frame then agree on what he said above
__________________
1968 LeMans Convertible - 462 w hydo roller comp cam forged flat tops- 6x-4 heads- performer intake - 800 cfm QJ- edelbrock 110 gph mech fuel pump- 4 row copper rad- followed by a Th400 w/2300rpm stall then a nodular 10 bolt posi w 3:90 gears ( need 3:55 bad |
#6
|
||||
|
||||
I had some heavy primer and paint on mine. I used aircraft stripper on a rag and it wiped right off. No need for scotchbrite, steel wool, etc.
__________________
Greg Reid Palmetto, Georgia |
#7
|
|||
|
|||
Get the wheel off, clean it up and repaint the frame, and the fender well. It can look good when the frame is painted, then mask the frame and fender and get some undercoating spray for the fender well. I can't STAND over spray where it shouldn't be.
__________________
1968 Firebird 400 RAII M21, 3.31 12 bolt, Mayfair Maize. 1977 Trans Am W72 400, TH350, 3.23 T Top Everyone you will ever meet knows something you don't. Bill Nye. |
Reply |
|
|