FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Non Pontiac Motors in Pontiacs includes factory 403,305,350 Chevy, Buick V6, Also Pontiac Motors in non-Pontiacs! |
Reply |
|
Thread Tools | Display Modes |
#61
|
||||
|
||||
I did some wiring, installed the motor harness. I re wrapped it with tape so it would fit and look better.
Also I dug out the 1965 wiring harness. I'm glad this car is simple cause I don't remember how it worked |
#62
|
||||
|
||||
Pontiac LS
|
#63
|
||||
|
||||
Other side
|
#64
|
||||
|
||||
Another gift... PS hose for a c5 vette fits. I bought it for the tip that screws into the pump figuring I'd chop off the rubber and weld a AN fitting to it and make a hose, but this will work.
|
#65
|
||||
|
||||
I bought a very basic wiring harness. Should help tidy up under the dash.
|
#66
|
||||
|
||||
Quote:
Do you have the GM part number for that hose by any chance? Car is looking good.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
#67
|
||||
|
||||
Don't know if you can tell but the alternator is very very close to the front bars of the cage. That it fits at all is blind ass luck. I didn't realize the vette pulleys hang it out there so far when I put that bar in. I figured I didn't want the motor to move and it hit, even though engine torque would move it away, so I got some solid motor mounts. Except I bought the wrong ones. But notice that blue bracket holding the wire for the cam sensor, that piece came off the 326 ;-)
|
#68
|
||||
|
||||
36363180 I think. I went to car quest and asked for a hose for an '03 vette. Made me nostalgic.
|
Reply |
|
|