FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
NEED HELP!!!! Need header flanges in the detroit area
I'm in pretty desperate need of a set of 2"+ header flanges for a set of headers im building this weekend. I ordered a set but they are not here and no tracking number being given leads me to beleive they will not be here.
If you can help please pm me or email at fastgreenbird@gmail.com. I'll buy or trade mine.....
__________________
EHTTFMF! Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
#2
|
|||
|
|||
PepBoys stocks them in their "Speed Shop" store in Easpointe. They are from Hedman... various sizes.
(I ran into similar issue last spring... needed a set for the Hot Rod PowerTour at last minute) Good Luck! -Kevin |
#3
|
||||
|
||||
NAPA in union lake may have them..
__________________
72 Luxury Lemans nicely optioned |
#4
|
||||
|
||||
Not gaskets. Actual flanges. Steel or stainless
But thank you for the replys.
__________________
EHTTFMF! Being dead, it is not hard on you. You don't even know you're dead. It is hard on everyone else that is not dead. BEING STUPID WORKS THE SAME WAY! The rest of us suffer. |
#5
|
||||
|
||||
I actually just cut the flanges off my new hooker headers. . . We always do. We use the reducing cones butted up to the headers and we've never had them leak.
__________________
1967 GTO, 432 (428+.030), 4-bolt mains, factory Nodular crank, scat rods, icon dished pistons, Lunati HR 243/251@.050, .618/.622 lift, Edelbrock 72cc round port heads, 10.5:1, offy 2-4 intake, Edelbrock 650cfm carbs, Super T10 trans (2.64 first), BOP 10 bolt w/ Eaton posi and 3.36 gears |
#6
|
||||
|
||||
I have a set of 2 inch stainless from stainless headers manufacturing I haven't used yet, but I am north of Chicago......
|
#7
|
||||
|
||||
Mike if you get stuck I drew up a .DWG CAD file for my Butler 315 E-Heads if you have a laser/water jet cutting place nearby, they could cut them out for you if you get stuck. I drew them up with 50mm openings for 1.875" primaries, but if you need 2" openings then that's no problems and I can tweak the drawing. Just PM me and i'll shoot it over ASAP if you need.
This is how they turned out.
__________________
'71 Holden HQ Monaro - 3850lbs race weight, 400c/i - 11.4 @ 120 '66 Pontiac GTO - 389, 4 speed street cruiser |
#8
|
||||
|
||||
http://maddogheaders.net/products/header-parts
Allen MI about 80 miles away. Only problem is, business hours say closed weekends.................... |
#9
|
|||
|
|||
When I said PepBoys, I meant steel flanges from Hedman (not just gaskets). The flanges were wasted on my pipes, so had to cut them & weld new ones the night before PowerTour
|
Reply |
|
|