| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
01-18-2015, 10:38 PM
|
|||
|
|||
engine angle
Looking for the engine angle for the ohc 6. i'm not sure if there was a difference between the angle for A-bodies vs F-bodies.
Anyone able to take a measurement off the cam housing to find the engine angle?
__________________
 Jon Peters 66 tempest 3880 lbs with driver 455 .40 over, 6x, XE274H cam, th350,9 inch 3.89, 275/50/15 mt dr 13.04 et / 102.51 mph 11.97 et/ 113.68 mph w/150shot 75 Astre Turbocharged OHC 6, TH350 1/8 mile stats 8.4813 ET / 82.07 MPH |
|
#2
01-19-2015, 12:42 AM
|
||||
|
||||
|
You mean front to back?
Typically, the carb pad is flat, and the engine then has a rake of about 5º. If you have a manifold off to the side you could probably measure it out fairly easily using the carb pad as level. 1bbl or 4bbl manifold. Both A and F bodies should be the same angle.
__________________
__________________________________________ "How I learned to stop worrying and love the OHC Pontiac L6"  The Silver Buick- '77 Skylark coupe w/455, SPX, MegaSquirt 3 & TKO-600 (Drag Week 2011, 2012 & 2015!) 1969 Firebird with a turbo'd Pontiac L6 controlled by a MegaSquirt 3 and backed with a microsquirt controlled 4L60e and 4.56 gears! (Drag Week 2018!) |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
