| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-22-2014, 09:07 AM
|
|||
|
|||
1966 GTO Convertible Rear Seat Measurements?
I have a complete rear seat for a 66 GTO with the original vinyl covering, I am trying to determine if it fits a Convertible ( I am guessing that the measurements for a 66 GTO Convertible are different from say a Post Coupe or Hard Top), the measurement I took were: on the upright part of the seat, 55 1/2 inches across the top of the seat, and 57 1/2 inches across the bottom of the seat and 23 inches wide; on the bottom(place you park for butt) I measured 57 1/2 long at the top and bottom, and 20 inches wide.
Does anyone know if this seat fits a Convertible? Were rear Convertible seats the same size at the ones for Hard tops, and Post Coupes? Thanks, Steve |
|
#2
04-22-2014, 02:58 PM
|
||||
|
||||
|
The 66 GTO Convertible upper and lower seats measure 48" from side to side. These are narrower than the Hardtop and Sports Coupe seats due to the space taken up by the wells for the convertible top cylinders. Yours would be for a Hardtop or Sports Coupe (a/k/a Post Coupe).
Jim
__________________
"Never try to teach a pig to sing. It's a waste of time and it annoys the pig" |
|
#3
04-22-2014, 08:58 PM
|
|||
|
|||
|
1966 GTO Convertible Rear Seat Measurements?
Thank you! That answers my question. I don't have a Convertible Rear Seat.
Steve |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
