FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#21
|
||||
|
||||
items sold
Headlight brackets and bezels are sold, thanks Darren.
Disc brake proportioning valve is sold, Thanks Janne. |
#22
|
|||
|
|||
Non-A/C Dash Vent Flap Clips
DWID,
I'm looking for the small clips that hold the non-A/C dash vent flaps in place. I've attached a picture of what I'm talking about. Does your car still have them and are they in good shape? Also looking for a nice glove box insert. If you're able to help, please let me know what you want for them. Thanks. v/r, Rob |
#23
|
||||
|
||||
Hey Rob,
I do have some of those clips around, just let me have a look. Unfortunately the glove box insert was broken when removed. Rear seat is SOLD - thanks Tom trunk lid is SOLD - Thanks Richard |
#24
|
||||
|
||||
glove box door
If the glove box door has the original hinge intact I want it. Could you post a pic along with shipping $ to 18902. Thanks, Mark O.
You can also email the info since I might forget to look here after a while. mark.daleh2o@verizon.net
__________________
Ain't as good as I once was, but I'm as good once as I ever was. |
#25
|
||||
|
||||
email sent on the glove box door.
Front bumper brackets are SOLD - thanks Darren |
#26
|
||||
|
||||
Are the "Gauges (with bezel and printed circuit) - $200" the Rally Gauges?
Thanx |
#27
|
||||
|
||||
gauges
The gauges are just the standard idiot light ones.
|
#28
|
||||
|
||||
corner mouldings
Sale pending on the corner mouldings
|
#29
|
||||
|
||||
glove box door is SOLD thanks Mark
|
#30
|
||||
|
||||
Frame and rear upper control arms are SOLD Thanks Mike
|
#31
|
||||
|
||||
updated list of what is left (69 GTO)
inner grills with trim (one side pitted) - $75
15/16" front sway bar (blasted and primed) - $40 Turn signals (housings, bezels, lenses, and brackets) - $100/pair Front upper control arms $35 each or $50 pair Saginaw power steering gear - $65 Pitman arm - $30 th400 speedo cable - $25 Heater controls (non ac car) with bezel - $50 Gauge pod cluster housing - $65 Gauges (with bezel and printed circuit) - $175 throttle cable and plastic firewall mounting plate - $35 Headliner bows and clips - $40 set Headliner tack strips with hardware - $50 set ash tray assembly (paint to match, rusted inside) - $25 Auto shifter assembly - $75 e brake assembly with pedal - $45 complete Under rear seat cable protector - $25 Trunk torsion rods - $35 set (2 available) gas pedal assembly (complete) - $35 rear bumper support bumpers - $20/pr Door hinges - $75/all 4 Door latches and lock mechanisms - $65/pair Front lower valence panel (middle section rusted out but excellent for repairs) - $25 Front lighting harness - $50 Intermediate lighting harness - $50 Dome lamp with harness - $25 Lower windshield stainless - $75 front windshield stainless - $50 fender stainless mouldings - $15 Rear view mirror with all mounting hardware (red cover) - $25 Stainless window tracks - $50 pair Sun visors and brackets (need to be recovered) - $30/pair brake pedal and pedal pivot bracket - $35 rear bumper brackets (set of 3, rusted and need to be straightened) - $30 original rad support center bracket - $20 front drip rails - $20/set Tail light housings (plastic) - $50/pair (have 2 to choose from) rear marker lights - $25/set (will need new bezels) wiper switch - $20 Trunk latch assembly - $20 Gas tank straps - $25 pair Front disc brake set up - $200 (spindles,rotors,calipers,brackets.shields etc) Front steering set up (tie rods, centerlink, idler arm) - $75 Center links - $30 each Transmission tunnel metal (nice shape) - $40 red door panels (need to be redone) - $150 (complete) Rad support top plate, centre brace and brackets for 70 lemans $20 Steering column and pedal pivot bracket $25 mid 70's Pontiac dog dish hubcaps - $60/set Listed below are larger items that I prefer not to ship: rear glass (2 to choose from non tinted) - $100 each front windshield - $125 Full firewall and tunnel metal - $100 rear package tray with trunk lid hinges etc. - $85 Trunk divider panel with rear crossmember (where trunk divider meets trunk pan) - $85 Inner rear quarter structures with sail panel - $75 a side Roof with sub frame - $100 Complete bucket seats (red) - $500 Inner fenders - $125/pair Rear quarter glass - $65 each Doors - $100/each (have a few to choose from) Rear bumper (needs straightening and re chrome)- $65 Front fenders (need heel patches) - $125 each Fiberglass rear quarters - $75 each |
#32
|
||||
|
||||
Do you still have the 69 tail light housings? I'm interested.
|
#33
|
||||
|
||||
PM sent on the housings
|
#34
|
||||
|
||||
PM returned on Housings
|
#35
|
||||
|
||||
PM & PP sent.
|
#36
|
||||
|
||||
Tail light housings are SOLD Thanks Stu
|
#37
|
||||
|
||||
Endura Bumper is SOLD Thanks Frank
Turn signals and brackets are SOLD Thanks Tony |
#38
|
||||
|
||||
items sold
Trunk springs are SOLD - thanks cuz
Front disc brake set up is SOLD - Thanks Jan |
#39
|
||||
|
||||
Dome lamp with harness SOLD as well
|
Reply |
|
|