| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
09-04-2012, 12:04 PM
|
|||
|
|||
64 GTO Tri Power
I have a 64 GTO Tri-Power setup for sale. It has the correct center carb. The end carbs both look to be rear carbs so one would have to be drilled and tapped for the vacuum fiting. It has the correct water neck and the stove pipe that goes into the manifold. Included is the piece the heater hose attaches to.
All carbs will need to be rebuilt the carb on the front has a broken arm on the carb top (see picture). Center carb will need the guts for the choke. All carbs operate freely and are not stuck. Don.t know if these are numbers correct; but, they will function correctly. lI would have to verify: but, I believe the date code is third week of May. This setup would fit 61 to 64 but the manifold is considered correct for 64 and is a one year item Asking $700.00 + shipping. Last edited by El-bandit; 09-04-2012 at 12:24 PM. |
|
#2
09-04-2012, 12:13 PM
|
|||
|
|||
|
64 GTO Tri-Power
More pics
|
|
#3
09-04-2012, 12:33 PM
|
|||
|
|||
|
Wire spinner hub caps
I also have some 65 66 wire caps as well as three of the un-vented 64 wire caps.
. 65 66 vary in condition with dings small dents, and some curb reah. The 64's have some minor damage with one being reaol nice with very little damage ( won't show in photos). I will post the 65 66 photos seperate from the 64. The 65 66 are $25.00 each and the 64's are $75.00 each |
|
#4
09-04-2012, 12:35 PM
|
|||
|
|||
|
64 GTO Parts
more 65 66 caps
|
|
#5
09-04-2012, 12:38 PM
|
|||
|
|||
|
64 caps
the 64 caps
|
|
#6
09-04-2012, 02:06 PM
|
|||
|
|||
|
El-Bandit,
Please further describe the 65-66 wheels. Spinners (pot metal)- 1) pitting situation.any cracks,deep scratches,rub marks.etc. Spokes- S/S IIRC, straight? any physical damage noticable? all there? Cover body- Same as above #1 , especially the curb rash. Thanks Larry B.
__________________
Mr. President, you can't say Dallas doesn't love you " |
|
#7
09-04-2012, 04:21 PM
|
||||
|
||||
|
El-Bandit,
Looking at your carbs the end carbs both appear to be FRONT CARBS not Rear Carbs as listed in your post. That is not a show stopper for the potential buyer as Tim Benko has new bases and new tops for the carbs with the correct levers/etc. A good buy for someone, IMO. Tom Vaught
__________________
"Engineers do stuff for reasons" Tom Vaught Despite small distractions, there are those who will go Forward, Learning, Sharing Knowledge, Doing what they can to help others move forward. |
|
#8
09-06-2012, 09:20 AM
|
|||
|
|||
|
bump
Reasonable offer????
|
|
#9
09-07-2012, 11:46 PM
|
|||
|
|||
|
going to ebay
will be posting to bay if no interest
|
|
#10
09-12-2012, 12:15 AM
|
|||
|
|||
|
bump
bump
|
|
#11
09-12-2012, 01:01 PM
|
|||
|
|||
|
PM sent
|
|
#12
09-13-2012, 12:24 AM
|
|||
|
|||
|
reply
PM's answered
|
|
#13
09-16-2012, 10:37 PM
|
|||
|
|||
|
bump
bump
|
|
#14
09-23-2012, 01:56 PM
|
|||
|
|||
|
going to ebay
|
|
#15
09-25-2012, 12:09 AM
|
||||
|
||||
|
Price for 4 of the 66 covers to 37335
Thanks!!
__________________
1966 GTO Vert automatic. 1969 CR Judge Ram Air III 4sp Pattern Car. 1969 GTO standard 350HP TH-400. 2006 GTO Phantom Black 6spd. 1972 Formula 455HO Ram Air. 1976 LE Trans Am 50th Anniversary Edition with T top. 1976 Formula 350. 1977 Grand Prix Model J 350. 1978 Trans am 400 Pontiac. 1979 Trans am 403 Olds. 1968 Olds 442. 1971 TR6. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
