FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
hood pin size?
I need to get hood pins for a 66 A body, what height do I need? There is a variety of heights available. I will definitely get stainless or aluminum as opposed to chrome, and I don't want a lanyard. Any other recommendations? Thanks
__________________
Mitch Kunath |
#2
|
||||
|
||||
Can someone measure their pins for me?
__________________
Mitch Kunath |
#3
|
||||
|
||||
Mitch, there were a couple of GTOs in the Modified section at the PY Open House. Tho not sure if they're members here or not. One was parked next to me with the American flag flying.... Blue 67 GTO (IIRC) witht he dark blue flames on it. I think the owner's name was Mark(again IIRC). I think he has photos of his car somewhere here in PY in the 'Let's see your 66-67 Lemans/Tempest' thread.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. |
#4
|
||||
|
||||
I can only think of this one http://forums.maxperformanceinc.com/...highlight=1967 but no hood pins. There were two with flames next to each other, maybe the other one had them.
__________________
Mitch Kunath |
#5
|
||||
|
||||
Ok, that was the Post 67 GTO. The one next to me was the Hardtop and had the hood pins. He was from Maryland.
__________________
Gary Get in, ShuT Up, Hang On! Member of the Baltimore Built Brotherhood MY GTO built 4th Week of March 1966 "Crusin' Is Not A Crime" Keep yer stick on the ice. |
#6
|
|||
|
|||
I should be able to get you a measurement in the morning.
__________________
William (BJ) 1966 Pontiac GTO |
#7
|
|||
|
|||
Sorry I wasn't able to get over by my car yesterday but I got there tonight. So the overall height of the entire pin is 4" There is 2.5" of threaded area, 1.5" of smooth. The hole for the securing pin is 1/2" down from the top.
Hope this helps.
__________________
William (BJ) 1966 Pontiac GTO |
#8
|
||||
|
||||
Thanks William, that helps a lot. Now I can place that order with Jegs.
__________________
Mitch Kunath |
Reply |
|
|