| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-11-2009, 12:43 PM
|
|||
|
|||
1972 Luxury Lemans Parts
I have the remnents of a front clip I bought a few years ago. Maybe someone might need some of this stuff.
Driver side fender - It is a pretty good piece except for the back lower metal. It will need one of those patch panels from Sherman or Goodmark. Has all the trim. $50 Nose piece with grills and brackets - there is only light surface rust, with a small dent on the nose where the emblem goes. $100 Upper core support deck (this is where the hood latch attaches) -the core support was junk so I cut below the plate. This piece would need the spot welds drilled out, but it has only minor surface rust and would clean up nicely. $40 Driver side inner fender - has only minor surface rust, with a small crack on the lower bottom flange towards the bottom. It is less than a 1/2 inch. $50 Bumper with brackets - bumper needs some straightening and brackets need sandblasting, but a fairly decent piece. $40 Lower chrome valance- has surface rust and dinged up, but could be worked to look good again. $25 Hood latch assembly - don't have the rod, but does have the cable. $40 Headlight Harness w/horn - I haven't tested, but I will if someone is interested. $25 (I won't sell unless it works) I can send pictures if interested, please send a PM. My daughter has my camera and it could take a couple of days to get you a picture. Thanks for looking |
|
#2
04-11-2009, 09:59 PM
|
||||
|
||||
I am interested in the horn, as long as it is an original Delco Remy. Let me know if it tests OK.
Shipping to 14830.
__________________
1976 LeMans B09 Freeway Enforcer, 455/M40 Smokey 1977 Trans Am, 400/M21 Black/Gold Bandit. 44K actual miles 2017 Sierra SLT 1500 Z71 4X4  2019 Canyon SLT Crew 4X4  
|
|
#3
04-19-2009, 04:55 AM
|
|||
|
|||
|
bump
|
|
#4
09-20-2009, 01:04 PM
|
|||
|
|||
|
I still have some of this stuff. The hood latch is sold. I will accept offers. The fender really is in good condition except for that lower area. Here are some pictures of some of the stuff. I can get more pictures if you need any of the stuff.
|
|
#5
09-21-2009, 08:02 AM
|
||||
|
||||
|
Will the header panel fit a 1971 Lemans that came with the fiberglass panel? Any pictures of the front valance panel?
__________________
1971 Pontiac GT-37 Car is a junk yard dog and maybe one day will be restored. 
|
|
#6
09-21-2009, 08:53 AM
|
||||
|
||||
|
Header will fit grills are different, you have to fill the holes for the emblem though. on the good side the steel ones are much more durable. Mark
__________________
69 GTOx2 69 Judge CR 4SPD 70 RAIV Auto Judge 71 GT-37:usa2 71 T/A WHT AUTO 71 T/A LB 4SPD 72 T/A WHT 4spd 74 SD T/A Admiralty Blue Auto others that reside in the barn too
|
|
#7
09-25-2009, 09:33 PM
|
||||
|
||||
|
72 lemans
can i got some pics of the header like to see if it is the same part i need thank you rich
|
|
#8
09-25-2009, 09:37 PM
|
||||
|
||||
|
can i got your number im very interested in the header panel.
or heres my # 586-838-9280 ask for rich thank you |
|
#9
09-26-2009, 04:08 PM
|
||||
|
||||
|
The steel panels dont interchange with the fiberglass panels.The mounting holes in are different. I know - I've tried.
Craig |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
