[Novaracer]

Anyone know if other then the front part of the fender (front of the wheel well forward)are the fenders the same?Reason I ask is I think the fenders on my 71 are pretty bad and would like to get new ones.Problem is,no one makes them.So i thought I could take a 70 fender and splice the front part of the 71 fender to it.

[Jumpstart]

http://forums.maxperformanceinc.com/...d.php?t=544481

Nova are you going big with the brakes? Maybe the Z06 brakes?

[Novaracer]

Thats good to know about the fenders,thanks!I am usin 96 corvette brakes on the front and 2000 camaro on the rear.They are 12 inch rotors.

[steve v]

The 70 should be a spot on donor fender if you're planning to graft the front section to it. I converted a pair of 71 Lemans fenders to GTO fenders by welding the GTO section to them. Take plenty of measurements & start cutting!

[2002Z4CSS]

Are 1971 Lemans 2 door fenders the same as a 4 door or wagon and the same as a 1970 or 1972?

[pggto]

Originally Posted by 2002Z4CSS

Are 1971 Lemans 2 door fenders the same as a 4 door or wagon and the same as a 1970 or 1972?

Yes the front ends are the same, thats why its so easy to make a GTO station wagon.

[Jumpstart]

Nova, I thought I had seen your build before over on pro-touring. Keep up the good work!

[2002Z4CSS]

Originally Posted by pggto

Yes the front ends are the same, thats why its so easy to make a GTO station wagon.

That is good to know. Chevelle 2 doors are different than a 4 door or wagon from 1970-1972.

[PB]

Check out this tread for some details on differences:

http://216.178.81.108/forums/showthread.php?t=393447

[PB]

Originally Posted by steve v

The 70 should be a spot on donor fender if you're planning to graft the front section to it. I converted a pair of 71 Lemans fenders to GTO fenders by welding the GTO section to them. Take plenty of measurements & start cutting!

Nice work there steve!