FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Doug's and 76 Trans am
Hi All: What to talk to anyone who is running Round port Doug's Headers (D-581) on a 76 Trans am with Standard tranny.
What to know how they fit? Any issues? Ground Clearance? These will be going on a 455 with #197 round port heads.. My other option will be to go with Ram Air Manifolds 2.45" RM-4-OS Thanks for your input. Charles |
#2
|
|||
|
|||
Good luck Chuck - I'm trying to figure out the same. Given my experience with Doug's (69 GTO d-port and 76 TA d-port), I'd use them IF the 1 7/8 were going to be enough. I have not used the Doug's round ports - I just like their products.
I am going to put a street build IAII with Eheads in my 76 TA - the 1 7/8 are just not going to do it. I am leaning towards the Hooker SComps - unless I can find out something more (positive) about the Mad dog headers. If you get some info, let me know. Lou |
#3
|
||||
|
||||
Ok.. Thanks.. I have a friend with large headers on a 76 T/A.. i'll let you know what kind he has next time I see him.
Thanks Charles |
#4
|
||||
|
||||
I'll post here too for Lou.
I think Maddog made Nunzi's headers for years - and I bought two sets. Both fit very well, both 2" primary. Put your fear aside and order a set. I've seen the "H" brands hammered to death right out of the box to fit. No experience with Dougs - but I've heard they fit well also. |
#5
|
||||
|
||||
Thanks Chief455 for the info..
Charles |
#6
|
||||
|
||||
no prob
This was in the "race" section search: MADDOG Headers 3900 S. Allen Rd. Allen, MI 49227 (517)869-2308 talk to: Mark Delcamp Cell: (517)250-4487 Fax: (517)869-9012 |
Reply |
|
|