[JoePapa]

Hello everyone. I need to preface this thread by saying I'm on a very limited budget. So I'm looking to get the best clutch for the least money.

Option 1: http://www.fortwayneclutch.com/product_2_1.html





I use an 11" clutch on a McLeod aluminum flywheel and that's covered by a McLeod scattershield and mated to a Muncie transmission. Race weight is 3800 pounds and I usually launch between 4500 and 5000 RPM.

Engine Modifications:
'69 400 2 bolt block bored .030
Deck height set to zero
#62 Iron heads, milled and ported to flow 275 cfm at .500 lift
Stock 10/10 crank
Eagle H-beam rods with ARP fasteners
Forged TRW pistons
Bullet solid cam
Mallory Hyfire IV
Mallory Mechanical magnetic distributor
Edelbrock Performer RPM Intake, top 1” milled out of plenum divider
825 CFM Mighty Demon

Transmission:
’69 Muncie has been upgraded with Super Case, Iron Mid plate, M22 wide ratio gears
McLeod SFI Aluminum Flywheel
11” clutch

Rearend:
Dana 60 with 4.10 gears and 35 spline Strange axles and Aerospace disc brakes

Tires are 28 x 10 drag radials.