FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
Does anyone reproduce the clips to hold the small hubcaps on. My car is a 56 with 15" rims,but i have some 14"wheels off an early 60's and they have the same appearing slot to hold the clips. The ones i have are rusty and about 6 of them broke when i tried to put them on my best rims. I thought i read that maybe an olds parts supplier was reproducing them. any help would be appreciated. thanks bud
|
#2
|
||||
|
||||
![]()
A couple years ago someone suggested calling Todd Zimmerman at 920-526-3454.
http://forums.maxperformanceinc.com/...d.php?t=399343 |
#3
|
|||
|
|||
![]()
Oldsmobiles of that period used the same clips and Fusicks, an Olds restoration house, repops them. Their number is 860-623-1583.
|
#4
|
||||
|
||||
![]()
Thanks for your help, they are on the way. Bud
|
#5
|
||||
|
||||
![]()
Bud, are these clips on ebay comparable to price for what your getting?
http://cgi.ebay.com/ebaymotors/1955-...14196470QQrdZ1 They look a little differant though than the ones that came with the wheels on my 55. |
#6
|
||||
|
||||
![]()
Yes the ones on ebay look just like the ones from fusicks. I probably could have saved a couple bucks with the fellow from ebay as the ones i bought were 4.50 each. My 56 rims and the one 62 rim had the same clips as the ones i ordered. I have some rusty parts cars and when i tried to squeeze the clips to get them out 9 out of 12 broke. bud
|
Reply |
|
|