[superfreak]

Looking for a TH 400 to rebuild? Have some back seats from a 64 tempest.
Craig

[N0DIH]

I am looking for a decent set of stock rear lower control arms for a 68-72 A Body. Anyone have some collecting dust? I have a sway bar I want to mount, so I will be sending them to a local welding shop to box.

Thanks!

[form74]

GONE

Two free mid 70's oil pans, must pick up in western burbs of Chicago. Used dirty condition. Cleaning out Garage

[tremo]

Got a set of '69 #45 heads in the Denver, CO. area. I've got them on craigslist currently for $60 (both), but they're Free to Pontiac folk on PY. Pick-up only.

http://denver.craigslist.org/pts/238350656.html

Drop me a PM or e-mail me at info@ramairperformance.com if interested.

Seee-ya,

Jim.

[form74]

Title says it all, thought somebody might want original Hardware. EGR's from 74/75's and Core Support hardware from 74 formula.

Pick it up or Shipping shouldn't be more than a couple of dollars.

Have at least one bracket and bolt for the EGR's

[LeMans70Sport]

I have 2 bucket seats from a 70 Lemans. Frames and tracks are in good shape The seat upholstrey is in driver condition and are brown. I also 8 stock used 350 piston standard bore. The pistons I can send but the rest is pick up only from West Michigan area-49088.

[Uncle Phil]

I'm looking for a right and left side seat support / seat frame for a 68 Firebird. The ones I have a pretty rusty, and had to cut them out. This is the brace/support that is right on top of the floor pan where the seat connects.

I have several extra items for a 68' I'll offer up if I can find these.

Also...........Needing a decent shape glove box door and a valance (which goes between front window and rear of hood). Mine is pretty pitted.

Let me know on any of these....I'll look over my items, and offer up a few of them.

Phil

[DScruggs]

70 400 Block (.030 over) with "N" crank - some rust
Pistons and rods for same
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-8 heads

Assorted other F Body parts including shifter and cable, seat belt interlock, air cleaner housing etc.

All pickup only near DC

Need 4 cheap steel wheels and tires that hold air to remove racing tires for winter storage

[Thomasmoto]

Hi, Is the air cleaner housing for a TA shaker? I need just the bottom part of the air cleaner for my daughters 77 TA. We have the scoop, just not the part that holds the air filter.
Thanks, David

[DScruggs]

No. It is a plain 400-4V from about 74

[Lemans1]

Scruggs, do you think the 400 will need to be bored more than .040? I dont have any steelies around, only wheel I have with no purpose is a 60/70s style aluminum slot, but it has a tire and air and youre welcome to it. A buddy of mine might have something...you need all for? I will check it out.

Rich

[DScruggs]

.040 will PROBABLY be enough. I can't say for sure. I do need four wheels but you are welcome to the block regardless. If you want to come by and see lt let me know.

[DScruggs]

Block goes to metal recycler Friday

[kcompton]

In need of 15 inch (or larger) wheels. Upgraded to discs without a plan for the wheels, surely someone can help me out. Thanks in advance. not looking for handout, have a little $

[Lemans1]

Dscruggs, you have a pm.

[speedshopmike]

hi rich
hi scruggs
happy new year
-mike

[DScruggs]

Complete Big Car BOP TH400 - Was running fine when pulled.
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-4 heads,

Assorted other F Body parts including shifter and cable, air cleaner housing etc.


Need a set of BBC rocker Studs, ARP connecting rod bolts, Decent Q-Jet core.

All pickup only near DC

[Thomasmoto]

Originally Posted by DScruggs

Complete Big Car BOP TH400 - Was running fine when pulled.
2nd Gen F Body 10 bolt 2.73 open complete assy
I set of 6X-4 heads,

Assorted other F Body parts including shifter and cable, air cleaner housing etc.


Need a set of BBC rocker Studs, ARP connecting rod bolts, Decent Q-Jet core.

All pickup only near DC

Hi, Is the air cleaner housing for a Trans AM? I just need the lower part.
Thanks, David T.

[mashedfinger67]

Brand: Anchor (Korea)
Part#: 2335 (R), 2336 (L)


I got em' at checkerautoparts for $7.79 each when I had a hair brained idea that I could move my new 462 back in my '67 by using these mounts. They are just sitting around collecting dust and I am sure someone could use them. New owner to pay shipping. PM me if interested.

This is what Checker's web page say's the mounts will fit;

1970 - 1971 GTO
1973 GTO
1970 LEMANS
1972 - 1974 LEMANS
1969 - 1979 FIREBIRD
1970 - 1973 GRAND PRIX
1973 - 1975 GRAND AM
1971 - 1972 BONNEVILLE, GRANDVILLE
1971 - 1978 CATALINA, GRAND SAFARI

[DScruggs]

I'll take 'em