FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
North GA machine shops ????
I have a 74 Pontiac 400 block that I need to have cleaned and inspected. Do any of you Ga guys know of a good shop on the North side of town? I live right off GA400 in Forsyth CO.
Thanks |
#2
|
||||
|
||||
Only machine shop I know if is Jon Kaase Racing Engines in GA. http://www.jonkaaseracingengines.com/
__________________
Mark Strelka 1-866-446-4126 Download Brochure www.strelkabuilt.com mark@strelkabuilt.com |
#3
|
||||
|
||||
Good machine shop close to you is Brad's Machine Shop in Gainesville. He is just of Browns Bridge Road on your side of town. He did a 421 block and heads for me a year or so ago. If you can't find any info on him, let me know and I'll look up his number. He does a lot of racing engines, etc.
__________________
LEAD, FOLLOW, OR GET THE HE!! OUT OF THE WAY!!! HONEST JERRY'S SPEED AND EQUIPMENT
|
#4
|
||||
|
||||
Try 74TA, aka Brian Maloof, in Duluth...
He was talking about moving, but still in the same general area... 770.622.4979 or maloofracing@mindspring.com
__________________
1969 Firebird, Tx3-455/468 machined by CVMS E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid 850DP on E-85 by Eric Niefert/T2 1" plastic spacer T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400 1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine) https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be 1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine) |
#5
|
||||
|
||||
cool thanks guys
|
Reply |
|
|