| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-07-2003, 05:33 PM
|
|||
|
|||
Does anyone have any info on converting ball bearings to tapered bearings on front wheel bearings for a 55 Chieftain?
Someone in the Yahoo groups mentioned that this swap was possible with off the shelf bearings but didnt provide any #'s. Thanks in advance for any info. Dan |
|
#2
04-07-2003, 05:33 PM
|
|||
|
|||
|
Does anyone have any info on converting ball bearings to tapered bearings on front wheel bearings for a 55 Chieftain?
Someone in the Yahoo groups mentioned that this swap was possible with off the shelf bearings but didnt provide any #'s. Thanks in advance for any info. Dan |
|
#3
04-07-2003, 09:35 PM
|
||||
|
||||
|
Have you tried going to reputable parts store and just ordering them by application.(car year,make & model)
Most all ball bearings will be serviced with a tapered roller. I have used the tapered rollers the replace my ball bearings as long as I used both bearing and races in my 8-Lug drums. You can usually get a seal to replace the old felt design. Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
