| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
02-22-2003, 05:53 AM
|
|||
|
|||
Where can i get a center support bearing? What other cars interchange
|
|
#2
02-22-2003, 05:53 AM
|
|||
|
|||
|
Where can i get a center support bearing? What other cars interchange
|
|
#3
02-22-2003, 12:52 PM
|
||||
|
||||
|
Frog/ You can get just the bearing from most automotive aftermarket vendors such as Napa,Autozone,etc. If you need the whole driveshaft support you can send your old one to Steele Rubber Products and they will rebuild(revulcanization service) for $84.50 + SH. Just remove the bearing and send it to them. About three weeks turnaround time. I am not aware of any that will interchange with the 60 assembly. www.steelerubber.com or call
1-800-544-8665. Outlaw Pontiac Racers Association"For Those Who Live The Legend" Do it now fool! Life is short.
__________________
 ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far..  through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
| Reply |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Linear Mode
