FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
What a night-mare this was I finaly got the headers on the motor, had plenty of problems I solved the starter problem solved the oil filter problem now I got 2 more problems (my wife says I have a lot more than that)I had to remove the ac box on the fire wall I can live with out air but what are my options will I need to fabricate a box are does any body have any Ideals and problem # 2 is the transmission lines does any body make flexible lines are am I going to have to try and bend the ones I have to make them fit around these headers thanks.
Brian |
#2
|
||||
|
||||
What a night-mare this was I finaly got the headers on the motor, had plenty of problems I solved the starter problem solved the oil filter problem now I got 2 more problems (my wife says I have a lot more than that)I had to remove the ac box on the fire wall I can live with out air but what are my options will I need to fabricate a box are does any body have any Ideals and problem # 2 is the transmission lines does any body make flexible lines are am I going to have to try and bend the ones I have to make them fit around these headers thanks.
Brian |
#3
|
||||
|
||||
I replied to your post in the RACE section.
__________________
Patrick -------------------------------- *SOLD * 1971 LeMans street car, 428ci TH350 3:31 12 bolt, 3880#,13.6 @ 101.82 Show & go 1964 Tempest work in progress 400 with Tremec 5 speed 1967 LeMans drop top project. I tracked down my great grand father & dad's old car. |
Reply |
|
|