FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
![]()
was looking at buying a radiator are the 65 and 66 the same size and what is the measurement?
|
#2
|
||||
|
||||
![]()
was looking at buying a radiator are the 65 and 66 the same size and what is the measurement?
|
#3
|
|||
|
|||
![]()
Hollander shows them as completely different between '65 and '66. No dimensions on '65, but '66 says 17" x 26-3/8". Don't know if that's core dimension or outside. Core thickness varies with application.
|
#4
|
||||
|
||||
![]()
Hey Will,
I flew up to P/A yesterday and saw you were the last name in the fuel log. Hows H/B treating you? Did you ever get your engine started after your last post?
__________________
1969 Firebird, Tx3-455/468 machined by CVMS E-heads by Dave Wilcox/Comp Cams 300B-6 flat solid 850DP on E-85 by Eric Niefert/T2 1" plastic spacer T-400/PTC 4000/390's/30x9 Hoosier radial slicks,#3400 1.38 60' 6.32 @ 108 MPH at Northeast Dragway NC 5/23/15 (9th pass on new engine) https://m.youtube.com/watch?v=ePCu2v...ature=youtu.be 1.37 60' 6.26 @ 109 half track, 9.86 @ 136 1/4 mile, #3350 11/26/16 at Richmond Dragway (125th pass on new engine) |
#5
|
||||
|
||||
![]()
Hey senior chief hows it going? H/B is good real mellow here. Finally made second which is good.No haven't got the catalina running yet, I'm going to get a new ignition switch and voltage regulator and see if that solves my problems, will also check my grounding wires aswell.I've had the front clip off for the last 4 months to repair some rust holes in the fenders so once thats done and I can figure out my electrical problem she'll be good to go.Hows the bird running?
|
Reply |
|
|