FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
My car has a six cylinder in it now and will soon have a 400. Question is, is the half of the mount that bolts to the frame the same for the 6 and the 8 cylinder or not? Also, if not, where can I find these other than a junkyard?
|
#2
|
|||
|
|||
My car has a six cylinder in it now and will soon have a 400. Question is, is the half of the mount that bolts to the frame the same for the 6 and the 8 cylinder or not? Also, if not, where can I find these other than a junkyard?
|
#3
|
||||
|
||||
The mounting brackets are different. I've seen a V-8 set routinely auctioned on e-bay, but they were outrageously expensive in my opinion -- over $100. I got a set from a parts car for my upgrade.
John 1969 Firebird resto...doing my part to keep PY profitable....
__________________
69 Firebird/TA clone |
#4
|
||||
|
||||
The reason there so high is they don't make them repo. Yes Ebay is the place to find a pair get all four pieces two frame mounts and the two small brackets underneath. LOL Bill
__________________
461 Stroker: 265/276 Comp Cam Solid roller . 340CFM E-Head Victor Intake 1050 Dom Carb. 390/430 9" Gears with a T400 trans 4200 converter. Street weight 3850. 1.49 60ft. 275/60/15 M/T DR 10.57 SO FAR |
#5
|
|||
|
|||
Thanks guys. Anybody out there made their own or have a drawing or dimensions for them? Even a good picture with through hole location related to the frame would possibly help.
|
#6
|
|||
|
|||
i have a pair email for pics 50$plus shipping gordskaz@shaw.ca
|
#7
|
|||
|
|||
Skas. Thanks anyway but I have already located a set. Ron
|
Reply |
|
|