FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
I've got a 3.5" system with an X crossover and Flowmaster 30s. I love the sound but my wife hates the sound level. Plus, I have to agree with her that it drones too badly on the highway.
Anyone have suggestions for another muffler that would lower the sound level but not hurt performance? I've got a fair bit into the engine and don't want the exhaust to choke it.
__________________
69GPModJ Moderation in everything--including moderation. WC Fields. |
#2
|
|||
|
|||
I've got a 3.5" system with an X crossover and Flowmaster 30s. I love the sound but my wife hates the sound level. Plus, I have to agree with her that it drones too badly on the highway.
Anyone have suggestions for another muffler that would lower the sound level but not hurt performance? I've got a fair bit into the engine and don't want the exhaust to choke it.
__________________
69GPModJ Moderation in everything--including moderation. WC Fields. |
#3
|
||||
|
||||
Kerry, I think the Dynomax UltraFlow is the way to go but not sure if they make a 3.5 inch.
You could use a 3 incher and a reducer of course. I run 'em on my Judge but have the 2.5 inch inlets and outlets
__________________
Knock Knock Knockin' on 11's Door '70 Judge, Palladium Silver w/Red Interior Powered by SD Performance, Ported 6X Heads 501 HP, 554 ft lbs TQ 12.14 ET @ 114 MPH , Supercase Muncie M22, 3:55 Suspension: HO Racing, BMR< Sykorat, and Bilsteins Narrowed 12 bolt , 16x8 VintageWheel Works, Comp T/As on street, MT Drag Radials @ Strip http://www.sdperformance.com/custome...1.php?carID=42 |
#4
|
|||
|
|||
I recall reading here in the PY forums that the Ultraflows are quiet but couldn't find the forum string with that discussion.
I've looked up the UltraFlows on the DynoMax site and, yes, they do come in 3.5" in / out versions. Looks as though my $1,000 then $1,300, then $2,900 system will now become a $3,200 system.
__________________
69GPModJ Moderation in everything--including moderation. WC Fields. |
#5
|
|||
|
|||
Get the Spintech XL's and run full tailpipes. I love mine.
|
#6
|
|||
|
|||
I've already got the full tailpipes. Spintech XLs eh? I'll look 'em up.
__________________
69GPModJ Moderation in everything--including moderation. WC Fields. |
#7
|
|||
|
|||
I,m running magnaflows on my car.I use to run flowmaster also to much drone.The magnaflows are the best thing I have done I,m taking flowmasters of my lincoln and going with magna flows also.
|
#8
|
||||
|
||||
i run the dynomax welded ultra flow 3 inch on my car and they are alot quieter than my flow masters were during normal driving and highway driving. They will change in sound once they break in. I love the way it sounds when you give it full throttle...
__________________
72firebird 3800# 496 316cfm eheads, 11.1:1 compression, custom solid roller, victor 4500 intake port matched, 1050 dominator, continental converter flash 4400 stall. 3.73. 2 inch headers with 3.5 with x to mufflers reduced to 3 inch full exhaust. mallory 250 fuel pump, cal tracs with split monos ..Pump gas 91 octane. |
#9
|
||||
|
||||
I use an Edelbrock 4" straight thru muffler on the T/A, it's real quiet for a straight thru muffler.
__________________
68 Firebird, trying a q-jet now. 434/10.5:1/997's/240-242 HFT/4L80E/2800 Yank/3.42's/ Vintage Air/ 13.0 @105 mph 70 Lemans, 350/350, A/C, mostly stock 14 Ram CC, 5.7 Hemi, 8-speed, 3.92 lsd 97 Trans Am, HPP Aug 2012 http://www.highperformancepontiac.co...tiac_trans_am/ ***Sold*** |
#10
|
|||
|
|||
Well, I'm getting the DynoMax Ultra Flow welded units. I'll report on the results.
__________________
69GPModJ Moderation in everything--including moderation. WC Fields. |
Reply |
|
|