FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
The Body Shop TECH General questions that don't fit in any other forum |
Closed Thread |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
I know that many GTOs and Lemans around 1970 had CID (ex 350) emblems mounted to the rocker panel moulding under the door and fender. I am attempting the installation of new "455" emblems on the rocker moulding of my 1972 GP. Does any one know how far back the LEADING edge of the emblem is supposed to be rearward of the LEADING edge of the actual rocker panel trim? Also the two emblems are different. One 'leans' to the right and one leans to the left. I need to know which one goes on which side. I think they both go on so that the tops of the numbers leans forward. You may reply directly to me at
billn@sine-comm.com Thanx, Bill N. 1972 Grand Prix Model SJ 455
__________________
Bill N. |
#2
|
|||
|
|||
I know that many GTOs and Lemans around 1970 had CID (ex 350) emblems mounted to the rocker panel moulding under the door and fender. I am attempting the installation of new "455" emblems on the rocker moulding of my 1972 GP. Does any one know how far back the LEADING edge of the emblem is supposed to be rearward of the LEADING edge of the actual rocker panel trim? Also the two emblems are different. One 'leans' to the right and one leans to the left. I need to know which one goes on which side. I think they both go on so that the tops of the numbers leans forward. You may reply directly to me at
billn@sine-comm.com Thanx, Bill N. 1972 Grand Prix Model SJ 455
__________________
Bill N. |
Closed Thread |
|
|