FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Crane Cam 284071
GRIND # SSH-322-NC
Anybody ever run it, have specs? Or an old Crane Catalog
__________________
"Spend all your time and money on that Pontiac GTO pile" - The Go-Gos, 1981 |
#2
|
||||
|
||||
SS-322-NC Mechanical,Rough Idel/Good Mid-Range HP
Intake open close BTDC 54 ABDC 88 Exhaust open close BBDC 88 ATDC 54 Adv Deg Dur 322 Dur @.050 252/252 Lash Hot .022/.026 LIft .526/.526 Out Of Cranes 1975-76 Book Found this - no H though. |
The Following User Says Thank You to ponjohn For This Useful Post: | ||
#3
|
||||
|
||||
Many thanks, much appreciated.
__________________
"Spend all your time and money on that Pontiac GTO pile" - The Go-Gos, 1981 |
#4
|
||||
|
||||
I ran a very similar Crane solid lifter cam in my old n/a 400, it made 575hp with ported iron heads and I ran 9.60's in a 2600lb car
|
The Following User Says Thank You to taff2 For This Useful Post: | ||
#5
|
||||
|
||||
HEY PONJOHN I have the same cam SSH-322-NC any info on the H or is it irrelevant on the other end is stamped x7763
|
#6
|
||||
|
||||
SSH-322-NC HYDRAULIC FAIR IDLE, GOOD MID-RANGE H.P.,DURATION 310-322, LIFT 465-483, INTAKE OPENS 45 BTDC, CLOSES 97 ABDC, EXHAUST OPENS 97 BBDC, AND CLOSES 55 ATDC. 3200 TO 5800 RPM. I have a pic of the cam card but cant get it to load.
|
Reply |
Thread Tools | |
Display Modes | |
|
|