FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Race parts stash
Performance parts Like new
Located in Charleston SC 455 rotating assembly, 60 over Ross forged pistons (XL421P), GRP billet aluminum rods (33976), stock 455 crank 4.210 stroke 3.25 main (496455). $1450 72 455 block with billet 4 bolt main caps and ARP studs, broken lifter bore, had a high lift solid roller and no brace will sell just the caps with or without the block I just thought someone may be able to fix it $300 Moroso deep sump oil pan 8qt capacity with pickup $175 Victor edelbrock intake, dominator flange $295 Billet thermostat housing $25 SCAT SFI approved flexplate $50 Front Engine plate $45 Aluminum valley pan no pcv $40 Roll master double roller timing chain, multiple key ways $75 Comp cams solid roller cam 306C-R8 QB4813 $75 Hedman Hustler Round port headers from 70s Ventura $150 I will add some more performance parts as I pull them out and get pics |
#2
|
||||
|
||||
How much for the caps and studs ?
|
#3
|
|||
|
|||
$300, just throwing the block in for free if you wanted it but I realize shipping the block is expensive so I’ll pull the caps and ship them and junk the block if need be
|
The Following User Says Thank You to ddella22 For This Useful Post: | ||
#4
|
|||
|
|||
Any pics of engine plate? Thanks in advance
Rob |
#5
|
|||
|
|||
|
#6
|
|||
|
|||
Is the timing chain new? Pics of the flexplate and thermostat housing please. Interested in all 3
|
#7
|
|||
|
|||
Everything had 8 passes on it until the lifter bore broke, pics attached
|
#8
|
||||
|
||||
Info Request
Any pictures of the rods and pistons from the other side? Maybe a close up of a rod and piston? Is the crank standard? Part number? Oil pan and pickup pictures? Whose pickup?
Thanks - Kevin
__________________
1972 Firebird 462, 6X heads, RA4 cam, iron intake, Cliff's Q-Jet 3925 race weight Best of 12.88 @ 105 so far |
#9
|
|||
|
|||
Quote:
Crank is cut 10 on main and rod journals 496455 is the part number |
#10
|
||||
|
||||
Intrested in the cam, got any specs on it. Post the card if you can.
GT. |
#11
|
||||
|
||||
PM sent on the caps
|
#12
|
|||
|
|||
Sorry I don’t have a cam card, all I have is the numbers off the end that I posted and that it’s a comp cams
|
#13
|
||||
|
||||
PM sent
__________________
1972 Firebird 462, 6X heads, RA4 cam, iron intake, Cliff's Q-Jet 3925 race weight Best of 12.88 @ 105 so far |
#14
|
|||
|
|||
Victor intake, flexplate, and main caps all sold
|
#15
|
|||
|
|||
I will take the cam if blueghoast doesn’t
|
#16
|
|||
|
|||
From what I found the cam is 275/278 .050 with 688/693 lift with 1.65’s. On a 104
|
#17
|
||||
|
||||
The R8 should mean the cam is. Solid Roller ground on a 108 LSA
|
#18
|
|||
|
|||
If it posts the pic here is the cam. Hope it is a 108 because 104 is tight but it a drag race cam.
|
#19
|
||||
|
||||
Quote:
GT |
#20
|
|||
|
|||
Front engine plate sold
|
Reply |
Thread Tools | |
Display Modes | |
|
|