FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
'69 Ram Air convertible resto
I picked this up a couple years ago and finally started the process. RA III M-21 3.90 car. Verdoro green/black/black...will not be green in the end
New floors, passenger 1/4 skin and outer wheel house, few small patches in other spots.Good deck lid, trunk pan. Driver's 1/4 was replaced with NOS a long time ago. Wasn't going to be a frame-off but it looks like it's headed that way now. |
#2
|
||||
|
||||
Subscribing!
__________________
Some guys they just give up living And start dying little by little, piece by piece, Some guys come home from work and wash up, And go racin' in the street. Bruce Springsteen - Racing In The Street - 1978 |
#3
|
||||
|
||||
'69 RA III convertible
Produced in Arlington Texas, shipped to Illinois and stayed there.
|
#4
|
||||
|
||||
'69 RA III convertible
few more
|
#5
|
||||
|
||||
'69 RA III convertible
Frame was blasted and had repairs around steering box. Front suspension will be restored too, just needed them back on for sheet metal work.
|
#6
|
||||
|
||||
'69 RA III convertible
Sheet metal guy does good work. Works out of his home.
|
#7
|
||||
|
||||
'69 ram air III convertible
Moving further on it. Friend did all prep and paint. Saving me a lot of $. Block at machine shop getting inspected. Supposedly, did not need rebuild but shop thinks otherwise
|
#8
|
||||
|
||||
'69 ram air III convertible
Picking body up this weekend hopefully. Then I've got to drop the frame, paint frame and install new stuff
|
#9
|
|||
|
|||
Wow!
I like the 69 Chevelle hanging out with it in your garage too. |
#10
|
||||
|
||||
Looking good Tom
|
#11
|
||||
|
||||
Looks very nice. Floor pan looks good too. How did you brace off the body to keep it from flexing? From the pic it looks like the doors were left in place.
Bryan |
#12
|
||||
|
||||
RA convertible
Thanks folks.
I wasn't there when the floor was put in but I believe the body was still bolted to the frame and the doors were left on for proper support. Inner rockers were also done at that time, to facilitate the one piece floor plan installation. |
#13
|
||||
|
||||
Looks great! Nice to see this awesome car being brought back to life!
|
#14
|
||||
|
||||
'69 ram air III convertible
Off the trailer and back home. Trying to scrape up some change to continue engine rebuild.
|
#15
|
||||
|
||||
IS the original block gone or still intact? What are your plans there?
__________________
69 OHC ZH Sprint Hurst 3 Speed 3:55 (1 of 213) 99 Valkyrie 1520cc Flat 6 108hp/110tq - For Sale http://sohcsix.yuku.com/forums/1/OHC-lounge Wanted: 1969 OHC "H" Camshaft |
#16
|
||||
|
||||
ram air convertible
Original block is gone. Car has a 2nd week of February, of '69 production date. I've got a complete November of '68 WS block, carb to pan. It was standard bore but will need to go .030 over. It's at the machine shop, ready to be rebuilt when I give them the green light. M-21 and 3.90 are already rebuilt. Hopefully by spring, it'll be on the road.
I'm thinking about going with red Legendary interior instead of black. I've got the black interior, that's nice driver quality already but think red might be a worthy investment? |
#17
|
||||
|
||||
Black with Red Guts would be fantastic!
|
#18
|
||||
|
||||
another vote for red interior…
__________________
"If the best Mustang is the Camaro, the best Camaro is actually the Firebird" David Zenlea |
#19
|
||||
|
||||
No Voodoo green.. pu**y!
Great looking car and red guts would be way cool!
__________________
A well regulated Militia, being necessary to the security of a free State, the right of the people to keep and bear Arms, shall not be infringed. 1966 GTO Hardtop - PS 14.84 @ 97mph |
#20
|
||||
|
||||
RAIII resto rounding the bend...finally
Yeah, its been a while but the end in sight...I had the paint done before the frame...long story...almost ready to set the queen on the thrown again.
|
Reply |
Thread Tools | |
Display Modes | |
|
|