FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
I'm going to use stock valve covers, twist on/push on holes. Who makes a twist on Mopar breather? I'm looking to vent into the air cleaner on both sides.
|
#2
|
|||
|
|||
I'm going to use stock valve covers, twist on/push on holes. Who makes a twist on Mopar breather? I'm looking to vent into the air cleaner on both sides.
|
#3
|
||||
|
||||
Guy. I don't know of any twist on MOPAR style breathers. Go to a parts store and ask to look at thier master filter guide. There is usually an illustrated buyers guide in them. I used to work for NAPA and the breathers were in their filter line.
__________________
ECM member. 2008 Outlaw Pontiac Drag Series Champion MANDRA Do it now fool! Life is short. 69 Grand Prix/3163lbs / IAII 535 w/ Tiger heads by Gaydosh....9.35@ 144 so far.. through mufflers. 1.26 60'. Going back to track with pump gas engine.... My 60 Ventura retired to street/strip duty.. |
#4
|
|||
|
|||
Thanks 60MAN. I thought somebuddy'S been there done that could send me in right way...but I'll get there. Way fast '60 60! How did you get thing going that fast in 1/8?
|
#5
|
|||
|
|||
let me know if you find them Guy... I am lookimg to do the same thing....thanks
|
Reply |
Thread Tools | |
Display Modes | |
|
|