FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
REAR BUMPER CENTER BRACE/BRACKET
I know '65 was solid and '66 had the small relief (for Fuel Spillage) but what about '67?
I thought I had some notes on it too being slightly different from '66 but can't find anything. Online shows lots of "66" brackets for sale but no '67. ?? Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#2
|
||||
|
||||
Part numbers are different between '66 & '67... 9782292 & 9786074.
Here's an original set on eBay for reference... https://www.ebay.com/itm/166343931528 |
#3
|
||||
|
||||
Correct, which leads to my question of in what manner they differ.
Looking at images of both '66 & '67 offerings they appear to be the same to me or does the surface that mates to the bumper have a deeper curvature on the '67? Cheers.
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
#4
|
|||
|
|||
isnt the part# stamped into it?
__________________
Everything comes and goes Pleasure moves on too early And trouble leaves too slow |
#5
|
||||
|
||||
Looking at the photos of both side by side, I think the '66 bracket may be a little shorter front to back?
|
#6
|
||||
|
||||
Hard to tell from the online images.
I had both brackets in the past but neglected to note the variation between the two
__________________
When I die, I want to go peacefully like my grandfather did, in his sleep. Not screaming like the passengers in his car. |
Reply |
Thread Tools | |
Display Modes | |
|
|