FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
Help with engine 455 rebuild
When I get the word back that it's going to clean up with a .30 over I am looking for a good cam that will work with a using a Holley Street Dominator intake/rebuilt Q/jet and a pair of GTO 1974 350 screw in studs #46 heads already completely redone . Not looking to be a race engine but just a good performance eng.?Thanks for any suggestions !!!
|
#2
|
|||
|
|||
RAIV type cam, 2802 maybe. Crower 60919
|
The Following User Says Thank You to Dragncar For This Useful Post: | ||
#3
|
||||
|
||||
What car, headers or exhaust manifolds, transmission (which converter if automatic) and what rear end gear/tire size?
All pertinent information that will help us to help you.
__________________
1964 Tempest Coupe LS3/4L70E/3.42 1964 Le Mans Convertible 421 HO/TH350/2.56 2002 WS6 Convertible LS1/4L60E/3.23 |
The Following User Says Thank You to b-man For This Useful Post: | ||
#4
|
||||
|
||||
Also how long of a drive do you foresee the car being taken on?
__________________
Wernher Von Braun warned before his retirement from NASA back in 1972, that the next world war would be against the ETs! And he was not talking about 1/8 or 1/4 mile ETs! 1) 1940s 100% silver 4 cup tea server set. Two dry rotted 14 x 10 Micky Thompson slicks. 1) un-mailed in gift coupon from a 1972 box of corn flakes. Two pairs of brown leather flip flops, never seen more then 2 mph. Education is what your left with once you forget things! |
#5
|
||||
|
||||
got any compression? i am thrilled with my 455 10.2:1 forged bottom end and mild #62 heads with Butler 6014 cam
https://www.youtube.com/shorts/q4QAbMc5Zac |
The Following User Says Thank You to 67Fbird For This Useful Post: | ||
Reply |
Thread Tools | |
Display Modes | |
|
|