FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
|
Performance Parts For Sale/Wanted Just Performance, non-stock, trailers, tools and related accessories here. |
Reply |
|
Thread Tools | Display Modes |
#1
|
||||
|
||||
Edelbrock 72cc Heads For Sale
Everybody seems to be out of stock of E-heads everywhere...except me. Get ready for this season with these.
Up for sale is a complete ready to bolt on pair of Edelbrock 72cc round port cylinder heads for a Pontiac. These were set-up for my blown alcohol funny car in 2006 but have never been run and are freshly pulled from the engine. Set up for a solid roller cam up to .750" net valve lift, specs are as follows: New Ferrea 2.19/1.78 competition valves, new Comp 10 degree locks, new Comp 947-16 springs, new Comp 739-16 titanium retainers, new Comp seat cups, new guide seals, all machine work finished and ready to go with a competition port/polish to the intake and exhaust ports. Don't ask for a flow sheet, I have none, but these should flow in the 330-340 cfm range @ .700" lift conservatively. Over $3800 in 2006 dollars invested, you couldn't duplicate these from new bare castings today for less than $5K. $3500 with the T&D shaft rockers, $2600 without. Can ship in the original boxes they came in. Check FB Marketplace ad link or pics below. https://www.facebook.com/marketplace...ID=0&refType=0
__________________
Just a blind squirrel looking for a nut. |
#2
|
|||
|
|||
Pm sent
__________________
Be carefull of the feet you step on today.They may be attached to the a$$ you kiss tomorrow. |
#3
|
|||
|
|||
do these heads require offset lifter on intake
|
#4
|
||||
|
||||
I'd be interested if chiefbigb doesn't take them.
|
#5
|
||||
|
||||
Heads are sold. T&D shaft rocker system is still available. chiefbigb has first refusal, followed by GTO Yea.
__________________
Just a blind squirrel looking for a nut. |
#6
|
||||
|
||||
I'm all set on the rocker system. Thanks anyway!
|
Reply |
Thread Tools | |
Display Modes | |
|
|