FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
|||
|
|||
69 428 HO ENGINE XG CODE
I have a 69 428 HO block, crank, heads, intake, XG code with the four bolt mains. Block has been tanked and bored to 28", heads have not been touched, also have the crank and intake, possibly some of the other parts. Thanks 1300 plus shipping.
|
#2
|
|||
|
|||
Where are you located?
|
#3
|
|||
|
|||
Located right at Ontario/Grand Portage MN., I can probably get it to Duluth MN if needed. thanks
|
#4
|
||||
|
||||
Any pics? How does it look in terms of external pitting etc? Not sure what you mean when you say bored to 28"?
__________________
My Break Away Squad 1969 Fbird (Base, 350, 400HO & Sprint Cvt’s - 400HO & TA Hardtops) 1969 LeMans (2dr & 4dr Hardtop and a Cvt) 1969 LeMans Safari 2 seat Wagon 1969 GTO (2 Cvt, 2 Hardtops & Judge Hardtop) 1969 Catalina (3 Cvt’s & a 2dr hardtop) 1969 Ventura 2 Seat Wagon 1969 Executive 4dr Sedan 1969 Bonnie Cvt 1969 Bonnie 3 Seat Wagon (2 of them) 1969 Bonnie Brougham (4dr Hardtop & Cvt) 1969 Grand Prix SJ (2 of them) 1969 2+2 2dr Hardtop (Canadian model) |
#5
|
|||
|
|||
I can get some pics i don't believe there is pitting on outside of block, it's bored to 28" so you can properly fit your pistons at 30" machine shop i use won't bore it to 30" without having the pistons for it. Thanks
|
#6
|
|||
|
|||
He means .028 over I think so it cam be honed to whatever the pistons require.
|
#7
|
|||
|
|||
Yes correct at 28" to properly fit pistons at 30'' will post some pics soon. Thanks
|
Reply |
Thread Tools | |
Display Modes | |
|
|