FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Need 70 LeMans/GTO parts!!
Okay, there are a couple things i am looking for. I am in Austin Texas and not ideally looking to get parts shipped to me...
1. 70 lemans/gto trunk lid with no rust, looking for something driver quality that needs minor work - looking to pay 200 max 2. also need a 70 lemans power disk brake kit 3. the front cowl piece by the window 4. Radiator core support for a 70 lemans (gto one is said not to work?) 5. tubular control arms (upper and lower- not needed but def would be neat) 6. passenger side door, just need the shell really, again driver quality is ideal if you have any odds and ends im doing a total restoration of a 1970 HT LeMans Sport 350, so if you have something you think i might need, shoot me a pm! also my email is Ajm@austin.rr.com thanks!
__________________
1969 el Camino SS 396 1970 LeMans Sport 350 2000 Camaro 3.8 |
#2
|
|||
|
|||
I have a perfect core support. 70 lemans
175.00 plus shipping |
#3
|
||||
|
||||
I got a trunk lid just not sure if your looking for more closer to you. pm me if your interested and I'll get pic's for you.
|
#4
|
||||
|
||||
I just remembered, i also need both fender patches (rear part of the fender).
__________________
1969 el Camino SS 396 1970 LeMans Sport 350 2000 Camaro 3.8 |
#5
|
||||
|
||||
Disc Brakes
I have have disc brake parts available.
|
#6
|
||||
|
||||
is it the disk brake conversion setup?
__________________
1969 el Camino SS 396 1970 LeMans Sport 350 2000 Camaro 3.8 |
#7
|
||||
|
||||
So instead of buying the whole core support, i have decided to just repair the one i have,
the piece i need is the driver side near the bottom where the actual frame runs across, i have attached a picture. if anyone has an un-usable support that has that section in good condition and would willing to cut it out and ship it to me, i would gladly buy it.
__________________
1969 el Camino SS 396 1970 LeMans Sport 350 2000 Camaro 3.8 |
#8
|
||||
|
||||
Disc Brakes
I have spindles, steering arms, dust shields, caliper brackets, rubber hose brackets, proportioning valves and hold off valves. Not worth the extra shipping on caliper cores or rotors.
|
#9
|
||||
|
||||
Thanks to Gtomygotta for the trunk lid, now i can finally finish most of my body work!
just a reminder, Im still going to need: fender patches** the driver side chunk of the radiator core support the entire front cowl piece under the window *** (Need this BAD) OH and possibly the header panel...mine is cracked but im going to try fiber-glassing it back to health.
__________________
1969 el Camino SS 396 1970 LeMans Sport 350 2000 Camaro 3.8 |
#10
|
||||
|
||||
|
#11
|
|||
|
|||
post a pic of your cowl..i have a few cowls that i cut those out of...i may be able to help..i might have the core support piece too..im in KC and i gotta ship..if you arent willing to pay shippin then i dont want to waste my time getting pics etc..you siad you really wanted local stuff
__________________
Mark.. The Goat whisperer "I spent a lot of my money on booze, crazy women, and fast cars. The rest I just squandered." |
Reply |
Thread Tools | |
Display Modes | |
|
|