| FAQ |
| Members List |
| Social Groups |
| Calendar |
| Search |
| Today's Posts |
|
#1
04-21-2024, 07:16 PM
|
||||
|
||||
Rocker stud length.
Finishing up my 455 from a flat cam. And never thought about it till now but are my rocker studs too short? ARP 1.9000 installed height 7/16 studs. Been installed for many years. You can see the shiny rub mark of the roller trunion. I have about 6 turns on my polylocks. Have longer valves installed and thus longer pushrods too. Pattern seems pretty good. Just a hair over center. Just wondering if I should get longer studs or ones with less thread length more shank length? Or am I over thinking it?
__________________
Dan Pesonen  "If it ain't broke, modify somethin till it is" |
|
|
The PY Online Forums is the largest online gathering of Pontiac enthusiasts anywhere in the world. Founded in 1991, it was also the first online forum for people to gather and talk about their Pontiacs. Since then, it has become the mecca of Pontiac technical data and knowledge that no other place can surpass.
Threaded Mode