FAQ |
Members List |
Social Groups |
Calendar |
Search |
Today's Posts |
#1
|
||||
|
||||
Zero or -.005
I always thought a true .000 deck height with a .040 head gasket was good practice for an efficient engine. My machinist recommends -.005 says zero with a .040 gasket is too close. I am using 6.8 Eagle rods and a 4.25 Scat forged crank and E-heads. I mocked it up yesterday with pistons in four corners and it's currently -.012, -.014, -014, -.015. What is your experience. Thanks.
__________________
Tim Corcoran Last edited by Tim Corcoran; 03-21-2024 at 08:04 AM. |
|
|